• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

computers

  • Thread starter Thread starter 93 notch_coupe
  • Start date Start date Apr 30, 2007
9

93 notch_coupe

New Member
Apr 27, 2007
19
0
0
Apr 30, 2007
#1
  • Apr 30, 2007
  • #1
I've been reading all this stuff on computers and i would like to know if i have to have mine reprogrammed i have a 93 5.0 and did a h/c/i and tb and have some header issues with the #1 and #8 cylinders (getting red) and the timing is correct and i had a mechanic tell me today that the problems would never be solved until i had my computer reprogrammed or a custom chip made to make up for the added air and i have not done any fuel mods. i need some info on this cause i can't drive my car until i get this fixed.
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
May 1, 2007
#2
  • May 1, 2007
  • #2
First, and foremost, find a new mechanic. Second, what are your mods? Before someone else comes along and makes the request, you should create a signature that lists your mods. It makes things easier when trying to help solve problems, and gives you some bragging rights if you have some nice work done.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
May 1, 2007
#3
  • May 1, 2007
  • #3
finding a new mechanic is a good first step lol

First, pull the diagnostic codes. They may not reveal much in this instance, but this is always a good place to start...


A couple of things can cause hot headers...
AFR, ignition timing, valve issues, etc.

What h/c/i did you install? (your sig is a good spot to list these)
What is the timing set at?
Where all the parts new?


jason
 
9

93 notch_coupe

New Member
Apr 27, 2007
19
0
0
May 1, 2007
#4
  • May 1, 2007
  • #4
heres all the info on parts, trick flow h/c/i, 65mm tb, bored .30 new trw forged pistons new rod and main bearings. the fuel system is all stock, 19lb injectors and stock fuel pump, but i have a holley fuel pressure regulator. the timing is at 14* fuel pressure at 40 with vac off. if i leave my computer stock can it handle these mods, i really don't understand about custom chips and computer tuning, i really need some help because my car is worthless right now.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
May 1, 2007
#5
  • May 1, 2007
  • #5
93 notch_coupe said:
heres all the info on parts, trick flow h/c/i, 65mm tb, bored .30 new trw forged pistons new rod and main bearings. the fuel system is all stock, 19lb injectors and stock fuel pump, but i have a holley fuel pressure regulator. the timing is at 14* fuel pressure at 40 with vac off. if i leave my computer stock can it handle these mods, i really don't understand about custom chips and computer tuning, i really need some help because my car is worthless right now.
Click to expand...
You should not need a custom tune on that combo.

The problem is elsewhere...

Pull the diagnostic codes from the computer as this should provide a good starting point for troubleshooting.

Good luck,
jason
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
May 1, 2007
#6
  • May 1, 2007
  • #6
Dump the codes and see what the computer says is wrong…Codes may be present in the computer even if the Check Engine light isn’t on.

Here's the link to dump the computer codes with only a jumper wire or paper clip and the check engine light, or test light or voltmeter. I’ve used it for years, and it works great.
See http://www.troublecodes.net/Ford/
OR
See http://www.mustangworks.com/articles/electronics/eec-iv_codes.html





IF your car is an 86-88 stang, you'll have to use the test lamp or voltmeter method. There is no functional check engine light on the 86-88's except possibly the Cali Mass Air cars.

Codes have different answers if the engine is running from the answers that it has when the engine isn't running. It helps a lot to know if you had the engine running when you ran the test.

Trouble codes are either 2 digit or 3 digit, there are no cars that use both 2 digit codes and 3 digit codes.

For those who are intimidated by all the wires & connections, see http://www.actron.com/product_detail.php?pid=16153 for what a typical hand scanner looks like. Normal retail price is less than $30 or so at AutoZone or Wal-Mart.

Or for a nicer scanner see http://www.midwayautosupply.com/p-7208-equus-digital-ford-code-reader-3145.aspx– It has a 3 digit LCD display so that you don’t have to count flashes or beeps.. Cost is $30.
 
9

93 notch_coupe

New Member
Apr 27, 2007
19
0
0
May 1, 2007
#7
  • May 1, 2007
  • #7
what will that actually do for the car, and how do i actually read the codes i really don't understand how to do this.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
May 1, 2007
#8
  • May 1, 2007
  • #8
93 notch_coupe said:
what will that actually do for the car, and how do i actually read the codes i really don't understand how to do this.
Click to expand...
It won't do anythig for the car, but it will give the car an oportunity to tell you what might be wrong.

The EEC-IV (the computer in your car) has the ability to record when a problem occurs. It records these problems as 'Trouble Codes' or 'Diagnostic Codes'
Using the methods outlined by JRichker will allow you to retrieve these Trouble Codes.

It is well worth the time to learn how to do, or the 35 bones to buy a scanner.

good luck,
jason
 
9

93 notch_coupe

New Member
Apr 27, 2007
19
0
0
May 1, 2007
#9
  • May 1, 2007
  • #9
if i don't have a codes scanner then how do i recieve the codes.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
May 1, 2007
#10
  • May 1, 2007
  • #10
93 notch_coupe said:
if i don't have a codes scanner then how do i recieve the codes.
Click to expand...

See the 6th post in this thread by JRichker

He provided a couple of links that go over the process.




jason
 

stang&2Birds

Founding Member
May 4, 2000
2,091
5
58
New England. :-) CT/MA
May 2, 2007
#11
  • May 2, 2007
  • #11
93 notch_coupe said:
if i don't have a codes scanner then how do i recieve the codes.
Click to expand...
http://store.summitracing.com/egnsearch.asp?N=400207+317181&autoview=sku
Spend $30. Or, put gas on the car and light it up. If you can't scan the codes on an old efi car, you better be Trump's son because you'll spend $$$ on mechanics fixing the car and/or wasted parts on the car.
 
You must log in or register to reply here.

Similar threads

Paint and Body Cowl Pan
  • jeremyzcook82
  • Sep 13, 2026
  • Fox 5.0 Mustang Tech
Replies
9
Views
334
Fox 5.0 Mustang Tech Oct 3, 2026
Rcdgl
R
Surging/stalling! problem or tune?
  • djj62478
  • Oct 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
409
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 14, 2026
KRUISR
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
529
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
Salvage/rebuilt title question
  • djj62478
  • Oct 2, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
218
1996 - 2004 SN95 Mustang -General/Talk- Oct 2, 2026
DadLife0724
S
4.6 spitting o-rings out of 2 injectors
  • skidad
  • Sep 30, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • 2 3 4
Replies
78
Views
2K
1996 - 2004 SN95 Mustang -General/Talk- Nov 4, 2026
skidad
S
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?