• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

confusing electrical problem

  • Thread starter Thread starter lilblueskeeter
  • Start date Start date Dec 16, 2008
L

lilblueskeeter

New Member
Mar 11, 2006
22
0
0
Dec 16, 2008
#1
  • Dec 16, 2008
  • #1
Im having a slightly confusing electrical problem. I was sitting in my car yesterday and with the engine off, key off and flipped the toggle switch to turn on my fan and my stereo came on which has never happened before. and also with just the fan turned on, and now the stereo i can also roll my windows up or down. Does anyone have any ideas as to what may be causing this? Somebody told me that i have a direct short in my fan which is causing my current to back track through my electrical system? Any help would be appreciated

Thanks: Danny
 
L

lilblueskeeter

New Member
Mar 11, 2006
22
0
0
Dec 16, 2008
#2
  • Dec 16, 2008
  • #2
Anybody have anything? I tried the same thing again this morning (turning just the fan on) and now i dont have any power to my stereo or windows with the fan on. which makes me lean more towards the fan being my prob. maybe 2 wires touching sometimes and causing it to screw up. need some ideas pretty quick cuz im having to drive it to work and back and im afraid it may really mess something up or catch on fire or something.

Thanks in advance.
 

MuDDuQ

Member
Sep 25, 2005
32
1
8
Dec 16, 2008
#3
  • Dec 16, 2008
  • #3
Try wiggling your ignition switch and see if that is the actual problem if it seems that wen you wiggle the ignition switch this causes the problem to arise I would change the ignition switch because it is burnt up and it could cause a fire. I am not talking about the key part the part that is bad if this is your problem is the roller contacts that the key engages
 
L

lilblueskeeter

New Member
Mar 11, 2006
22
0
0
Dec 16, 2008
#4
  • Dec 16, 2008
  • #4
i put a new ignition switch in it about 3 months ago and a new key cylinder in it about a month ago so i wouldnt think it would be that
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Dec 16, 2008
#5
  • Dec 16, 2008
  • #5
How is your fan switch wired up?
 
L

lilblueskeeter

New Member
Mar 11, 2006
22
0
0
Dec 18, 2008
#6
  • Dec 18, 2008
  • #6
Its just a 2 position toggle switch hooked to a 12V positive and to the control box. Its been set up like this for about 3 years and it just recently started this. I also noticed today, when i turned my key back to accessory my fan came on. (toggle was in the OFF position)
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Dec 18, 2008
#7
  • Dec 18, 2008
  • #7
There's a chance that the current has fried the switch, so it backfeeds the circuit at times, and leaves it open at other times.

You might find melted wiring as well. If it's near the stereo and window wiring, it can cause issues. I would dissect the entire run of wiring and replace the set-up with a proper set-up (using a pair of remote relays at a minimum. This keeps high power wires out of your cockpit).
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Dec 18, 2008
#8
  • Dec 18, 2008
  • #8
Do not use a simple on/off switch without using a relay. The current load can burn up the typical cheap automotive switch very quickly. The fan draws 30+amps and you need to use #10 wire on the fan power and ground wiring.

If you are good with electrical stuff (90% of the people here aren't), build your own controller. The numbers on the diagram (#86, #87, etc) refer to the numbers on the bottom of a typical automotive relay.



Note that the thermostat switch in the diagram isn’t really suited for the job. You’ll have to do a Google search and find your own.
 
P

PAzYearazzUP

Banned
Dec 12, 2008
33
0
0
Dec 18, 2008
#9
  • Dec 18, 2008
  • #9
Did you hook the toggle's ground to a bunch of ground wires? They sorta ping a certain voltage value is the ground completes the circuit. So, you use a ground box or J-box (junction of wires all connected), you can send the other J-box that does not use the first J-box is you take your toggle ground off the accessories or a j-box you may/may not be in?

I think it is your toggle to ground being you can send the hot 12v to your hot end of the component, but on the computer car with all that is J-box and you have that rev limiter with different grounds that use their own j-box so they can cut the coils, or A/C on the throttle up is shut that down for a second and all that window up and down is you an that accessory is ground the toggle on to the frame is no other wire to ground on the toggle.

No radio? Check fuses first thing.
 
You must log in or register to reply here.

Similar threads

Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
235
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
Resolved Wiring electric fan
  • cbac89
  • Aug 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
232
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 30, 2026
cbac89
T
Inside is completely dead
  • TunaCar
  • Oct 18, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
324
SN95 4.6L Mustang Tech Oct 20, 2026
DadLife0724
D
Electrical Weird door wiring issues
  • Dakar09
  • Oct 20, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
203
Fox 5.0 Mustang Tech Oct 21, 2026
Dakar09
D
M
1996 GT Speedometer electrical nightmare
  • moon96gt
  • Oct 7, 2026
  • SN95 4.6L Mustang Tech
Replies
2
Views
177
SN95 4.6L Mustang Tech Oct 17, 2026
CAMTWO1070
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?