Connector I.D.

M

monsters

New Member

Jul 20, 2005

16

0

0

Jul 20, 2005

#1

• Jul 20, 2005

• #1

I have a connector that I cannot seem to figure out where it goes or even find the wires in the wiring diagrams, it is loomed into the harness that runs by the master cylinder and the plug comes out of the loom right by the master cylinder. it's a flat-three wire plug with two purple and white wires and a black wire. Any Ideas?

 

jrichker

StangNet's favorite TOOL

In Remembrance. Thank you for your contributions

Mar 10, 2000

27,512

2,813

234

Dublin GA

Jul 20, 2005

#2

• Jul 20, 2005

• #2

The year of your car is needed since the wiring changed several times from 79-93.

AutoZone wiring diagrams

http://www.autozone.com/servlet/UiB..._us/0900823d/80/16/71/3c/0900823d8016713c.jsp for 79-88 model Mustangs

http://www.autozone.com/servlet/UiB..._us/0900823d/80/19/59/5a/0900823d8019595a.jsp for 89-93 model Mustangs

http://www.autozone.com/servlet/UiB..._us/0900823d/80/1d/db/3c/0900823d801ddb3c.jsp for 94-98 model Mustangs

 

M

monsters

New Member

Jul 20, 2005

16

0

0

Jul 20, 2005

#3

• Jul 20, 2005

• #3

Sorry, it's a 87 GT convertible 5-speed.

 

Saleen0679

10 Year Member

Apr 14, 2005

876

24

49

Yakima, WA

Jul 21, 2005

#4

• Jul 21, 2005

• #4

Sounds like the connector for the brake warning circuit. Does your brake warning light come on when the parking brake is engaged? Might check your proportioning valve for the connection point.