i recently put the trick flow top end kit in my 92 lx 5.0 and will be getting ready to start it the beginning of the upcoming week..monday or tuesday. I was wondering if there is a way to flush the cooling system as i am sure a few tiny debri got in there while installing. Can i flush with water somehow so i dont put coolant in and then drain it and put new coolant in. It will be its initiall start up after install so i want to be sure it is being properly cooled. Someone told me i cun run straight water with a flushing liquid for a little while then drain and refill will the correct ratio. Any suggestions? Thanks for the help!