• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

coolant leak

  • Thread starter Thread starter rockyracoon
  • Start date Start date May 7, 2006
R

rockyracoon

10 Year Member
Nov 23, 2005
874
27
49
margate NJ
May 7, 2006
#1
  • May 7, 2006
  • #1
it appears that im leaking freeze from between the timing cover and the block.I thought only oil could leak from there.It is not super bad but it is coming out and welling up on top of the cover in the little valley on each side,its not bad enough that any drips down onto the ground,plus it is evaporating on the hot housing cover. Every day I need to top off the reservoir.I replaced the timing chain last month and I used the gaskets provided with the kit,however I didnt use rtv,just the gaskets with some adhesive to hold em in place.But still I cant see how freeze can leak from there and not having a crankcase full of glycol.
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
May 7, 2006
#2
  • May 7, 2006
  • #2
it is probably comong from the intake gasket. it is actually pretty common for the corners of the intake gasket to leak on SB fords. be careful when you remove the corner intake bolts. odds are they are corroded and will snap off in the heads. use a little heat.
 
8

87'GTstang

New Member
Feb 16, 2004
1,025
0
0
May 8, 2006
#3
  • May 8, 2006
  • #3
Make sure the thermostat housing is not leaking either (nor the upper radiator hose connection).
 

rd

Founding Member
Jan 12, 2000
3,316
63
109
Ocean Springs MS
May 8, 2006
#4
  • May 8, 2006
  • #4
The bypass hose, the thermostat housing and the gasket between the block and timing cover, the timing cover to waterpump, and the plate on the back of the waterpump can all leak.

Sometimes a gentle tightening of the bolts will slow it up.

Best way to remove and replace the gaskets. I have had both gaskets and rtv work on the water pump.

The country boy would tighten the bolts and put in stop leak......
 
You must log in or register to reply here.

Similar threads

P
Engine Mysterious coolant leak at back of engine
  • palerider94
  • Jan 18, 2026
  • Fox 5.0 Mustang Tech
Replies
1
Views
281
Fox 5.0 Mustang Tech Jan 19, 2026
AeroCoupe
A
Resolved 302 oil leak when running
  • AlexM556
  • Sep 8, 2026
  • Classic Mustang Specific Tech
  • 2
Replies
36
Views
1K
Classic Mustang Specific Tech Nov 1, 2026
manicmechanic007
J
Engine Coolant leak from oil filter
  • jr273
  • Mar 26, 2026
  • SN95 4.6L Mustang Tech
Replies
9
Views
403
SN95 4.6L Mustang Tech Mar 31, 2026
squeak93
B
97 GT with 03 explorer Eddie Bauer edition 4.6l
  • basbill73
  • May 10, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
149
1996 - 2004 SN95 Mustang -General/Talk- May 11, 2026
squeak93
X
Engine 5.0 Head Gaskets installed wrong block coolant passages???
  • Xam Sirrah
  • Jul 21, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
959
Fox 5.0 Mustang Tech Dec 22, 2025
Qtrhrse23
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?