• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Coolant Leak

  • Thread starter Thread starter 89CobraGT
  • Start date Start date May 23, 2006

89CobraGT

New Member
Dec 14, 2005
113
0
0
Winnipeg manitoba
May 23, 2006
#1
  • May 23, 2006
  • #1
K Well I bought the BBK SSI Series Intake this year among other things the car was supposed to be running last sunday, and on that day I started pouring in antifreeze the very last thing there was to do.... Then damn theres a leak in the back of the motor looks like the lower intake (hope not) after about an hour of confusion I said ow well i'll take the lower intake off thinking the gasket may have slipped.. so today I took a look gaskets looked fine but I put new ones in and loaded it with RTV just to make sure bolted that down made sure all hoses and everythings connected, pour in antifreeze and damn the same leak two very small but constant drips does any one have any idea wtf is causing this??? I'm soo frustrated I put over 8000$ in the car that had a decent amount of mods to begin with and its almost summer and it hasnt even been driving this year I need help!!!!

http://spaces.msn.com/s8an666/ and if u want to see the bbk intake its here installed but leaky lol
 

craigwhite89gt

New Member
Oct 26, 2003
181
0
0
Cecil County Maryland
May 23, 2006
#2
  • May 23, 2006
  • #2
what kind of gaskets did you use?
 

troyGT03

New Member
Feb 22, 2004
278
0
0
too close to memphis,tn
May 23, 2006
#3
  • May 23, 2006
  • #3
intake gasket probs usually stem from prep problems. did you make sure the rear water jackets were totally clear of all old gasket debris?
 

maverick0716

Founding Member
Jan 12, 2002
3,924
0
56
Chilliwack, BC, Canada
May 23, 2006
#4
  • May 23, 2006
  • #4
troyGT03 said:
intake gasket probs usually stem from prep problems. did you make sure the rear water jackets were totally clear of all old gasket debris?
Click to expand...

I agree completely. Always make double sure that all surfaces are super clean.
 

dreddstang

Founding Member
Aug 26, 2002
1,816
2
38
Waldorf, MD
May 23, 2006
#5
  • May 23, 2006
  • #5
That, and BBK casting sucks. A buddy of mine local to me had a similar problem. Ended up having to get a new lower sent to him from BBK that was cast somwhat correctly, although it took several months of his car sitting with half a motor in it. Good luck, hopefully you just have to get your gasket surfaces cleaned.
 

89CobraGT

New Member
Dec 14, 2005
113
0
0
Winnipeg manitoba
May 23, 2006
#6
  • May 23, 2006
  • #6
hahah I found the problem damn leaky cheap piston ring gaskets lol doesnt seem to be sealed on the passenger side head damn I'm pretty sure the heads were clean i must've spent an hour cleaning them the first time then 20 mins last time tommarow though im gonna spend a lil more money see if there a one peice gasket for it but thanx for your hlep an advice everyone hopefully she'll be running tommarow night.... dont hold your breath though
 
You must log in or register to reply here.

Similar threads

P
Engine Mysterious coolant leak at back of engine
  • palerider94
  • Jan 18, 2026
  • Fox 5.0 Mustang Tech
Replies
1
Views
281
Fox 5.0 Mustang Tech Jan 19, 2026
AeroCoupe
D
Engine Coolant and Radio Issues
  • Don7Up
  • Sep 14, 2025
  • Fox 5.0 Mustang Tech
Replies
17
Views
844
Fox 5.0 Mustang Tech Oct 4, 2025
Don7Up
D
B
Engine Strange Noise
  • burntokita
  • May 8, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
565
Fox 5.0 Mustang Tech May 11, 2026
keel
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
892
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
M
Engine Unexplainable Exhaust Pop and Gurgle
  • Mrnissen122
  • Feb 14, 2026
  • Fox 5.0 Mustang Tech
Replies
12
Views
861
Fox 5.0 Mustang Tech Feb 18, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?