• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Coolant Rail??

  • Thread starter Thread starter asecretfile
  • Start date Start date Apr 17, 2008

asecretfile

New Member
Feb 11, 2007
228
0
0
Apr 17, 2008
#1
  • Apr 17, 2008
  • #1
Since installing the cobra intake and am not going to be using this hose going to the coolant rail....can I pull the hose off and cap the port with like a vacuum style rubber blank off cap or do I need something a little more heavy duty with a hose clamp with it?

View attachment 321767

thanks
 

asecretfile

New Member
Feb 11, 2007
228
0
0
Apr 18, 2008
#2
  • Apr 18, 2008
  • #2
anyone?
 

wythors

Get off my lawn!!!
Founding Member
May 17, 2000
2,277
35
69
C Addle
Apr 18, 2008
#3
  • Apr 18, 2008
  • #3
I took a 2-inch piece of hose, stuck a bolt in one end and then clamped the bolt to the hose and the hose to the rail.

BTW, make sure you check your car for oil consumption using that Chinese intake, especially after driving an hour or so on the freeway.
 

Maryland Stang

Active Member
Aug 21, 2002
1,656
30
39
Greenville, NC
Apr 18, 2008
#4
  • Apr 18, 2008
  • #4
I would cut the stub as short as possible and then have a rad shop braize the stub closed. It shouldn't even cost $10 to have it done. Don't forget to remove the fitting in the back of the manifold and put a plug in it if you haven't already done so.
 

fastford91

New Member
Aug 15, 2006
254
1
0
Niagara ,Ontario, Canada
Apr 18, 2008
#5
  • Apr 18, 2008
  • #5
cut the hose as short as you can and stuff a boldt in it and a clamp! mine have been like that for 10 years or more! no problems! but if its out of the car you can have it welded shut!
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,372
18,119
224
Massachusetts
Apr 18, 2008
#6
  • Apr 18, 2008
  • #6
I cut mine as short as possible and stuck bolt in it and clamped it.

One day i'll have it brazed correctly
 
You must log in or register to reply here.

Similar threads

M
2001 cobra coolant crossover delete
  • Mike3
  • Jul 5, 2026
  • SVT Tech Forum
Replies
4
Views
324
SVT Tech Forum Jul 12, 2026
Mike3
M
S
Fuel rail help
  • stang9150
  • Mar 3, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
526
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 5, 2026
stang9150
S
EVAP test port
  • bigc2330
  • Oct 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
517
1996 - 2004 SN95 Mustang -General/Talk- Nov 1, 2025
nickyb
Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
242
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?