Cooling System Help

stang_man_1

New Member

Feb 17, 2006

24

0

2

Feb 18, 2006

#1

• Feb 18, 2006

• #1

Because of the pi intake swap there was no place for the ect sensor. so the guy who had the car before me set the fan up to run constantly.

this resulted in a burnt out fan motor. so i am replacing it with an aftermarket electric fan and a new thermostat but my question is what temp should i set the thermostat to?

 

Dan_Soprano

15 Year Member

May 7, 2003

7,410

54

129

Jacksonville, FL

Feb 18, 2006

#2

• Feb 18, 2006

• #2

I thought the manifold for the PI swap had a hole tapped for the ECT sensor?

 

stang_man_1

New Member

Feb 17, 2006

24

0

2

Feb 18, 2006

#3

• Feb 18, 2006

• #3

If it did couldn't find it and believe me i've looked

 

sgarlic

Founding Member

Apr 21, 2001

3,085

1

56

Feb 18, 2006

#4

• Feb 18, 2006

• #4

Depends what T-stat you run. If you run the stock one, have the fan come on at ~212. It should bring it down to just above where the t-stat opens.

 

Mike97gt

it doe snot

Founding Member

Jan 26, 1999

10,633

7

89

the people's republic of massachusetts

Feb 18, 2006

#5

• Feb 18, 2006

• #5

the PI manifold has only one hole. most people build a t fitting. the previous owner i guess hacked yours.