Anyone here ever put copper head gaskets on a Ford? I used them on my MR2, and never had any problems, but I've never personally ran them on a Ford. I'm considering upgrading to copper head gaskets when I put my engine back together. This blowing a head gasket every 7 years is a PITA.
Kurt
Kurt
Adam95GT
New Member
Anyone here ever put copper head gaskets on a Ford? I used them on my MR2, and never had any problems, but I've never personally ran them on a Ford. I'm considering upgrading to copper head gaskets when I put my engine back together. This blowing a head gasket every 7 years is a PITA.
Kurt
no personal experience but when i talked to craig at radical awhile back he said never put them on a street car...
but 7 years isnt all that bad u tried mls cometic gaskets?
All i have used is standard felpro in all my cars with no problems.
I don't think you can run Cometic or MLS gaskets with an O-ringed head. In theory, an O-ringed head on a stock gasket should be stronger than a MLS gasket.
Kurt
Kurt
Adam95GT
New Member
I don't think you can run Cometic or MLS gaskets with an O-ringed head. In theory, an O-ringed head on a stock gasket should be stronger than a MLS gasket.
Kurt
AH forgot you had the o rings sorry
I've always used the standard Fel-pro head gaskets, but I think I'm pushing them too hard on the bottle.
Kurt
Kurt
Adam95GT
New Member
I've always used the standard Fel-pro head gaskets, but I think I'm pushing them too hard on the bottle.
Kurt
Yea... for the stress they are seeing i really dont think 7 years on the gasket is that bad...
Similar threads
- Replies
- 23
- Views
- 591
Forced Induction
Prepping for supercharger on non-stock build
- Replies
- 7
- Views
- 366
- Replies
- 3
- Views
- 669
What's it Worth?
2000 GT
- Replies
- 5
- Views
- 212