Hello, I am looking to buy two female connectors with at least 8” of wiring on each. I have an 87 TBird 5.0 engine and I need the EGR solenoid and the WOT AC relay connector.
You didn't mention how good or bad your connectors however, if they are decent shape then you may just need to pickup a kit to de-pin them and install new wires and terminals to your current plastic housings.
I'm also going to leave this pdf file here. I did not find your pigtails in it but it also lists make and female terminal service kits if you choose to replace the terminals in your current connectors.
They also have wire splice kits and terminal release tools:
Both of the connectors need a few of the terminals replaced since the wire cover is striped and bare copper is exposed. I’ve never successfully de-pinned a connector. And these connectors have already undergone reconfigurations with the unnecessary electrical tape to make them goo-central to work with.
The EGR Control vacuum solenoid connector looks like a popular Ford AC connector, but it’s not the same. I don’t know how much info you have on that connector, but it is .95” wide, .45” tall, and the two blades are .56” apart. I did find a new one, but first some reason, I can’t pull the trigger on a $43 connector with 6” of pigtails. And, I’m not 100% certain it’s the right one.
Hello, I am looking to buy two female connectors with at least 8” of wiring on each. I have an 87 TBird 5.0 engine and I need the EGR solenoid and the WOT AC relay connector.
I took the advice of a member here and de-pined the bad contact and was able tonrepair the wire. Was just hoping someone had a box of connectors to sell. Thanks again for the great advice.