Engine Crankshafts

timjimmy

Active Member

Jul 7, 2013

215

12

29

Clarksville, TN

Dec 17, 2014

#1

• Dec 17, 2014

• #1

I've been rolling around the idea of possibly stroking my '06 GT, and if not, at least strengthening my rotating assembly. I'm sitting on around 425 hp NA and would like to eventually supercharge or spray it as well as increase engine speed to around 7500 RPM. Either choice would include H - beam rods, the lightest, reasonably priced forged pistons I can find, and upgraded rings, but I haven't figured out if I need a forged or cast crank. Something I've considered is a cast Scat 9000 series crank, or something similar. Has anyone had any long term experience running an aftermarket cast crank on a stock blocked, 550-650 hp engine?

 

timjimmy

Active Member

Jul 7, 2013

215

12

29

Clarksville, TN

Dec 18, 2014

#2

• Dec 18, 2014

• #2

Never mind, I did some more research and these expectations are wildly unrealistic. I miss small block Chevys!

 

Bullitt347

I have been doing it wrong this whole time

15 Year Member

Mar 23, 2007

3,977

2,959

194

Middle of Maine

Dec 19, 2014

#3

• Dec 19, 2014

• #3

timjimmy said:

Never mind, I did some more research and these expectations are wildly unrealistic. I miss small block Chevys!

Click to expand...

Just how, in your opinion, are these "expectations wildly unrealistic"? Is it due to financial considerations, or is it due to availability of the "correct" components to make this happen?

 

timjimmy

Active Member

Jul 7, 2013

215

12

29

Clarksville, TN

Dec 19, 2014

#4

• Dec 19, 2014

• #4

Mostly finances. I could build a SBC with about 600 hp for around $4000. I'm well over that with my 3V and to reach my goal would require about another $7500.

 

timjimmy

Active Member

Jul 7, 2013

215

12

29

Clarksville, TN

Dec 19, 2014

#5

• Dec 19, 2014

• #5

Not to mention the cost of all the supporting modifications to handle it all.

 

SpartaPerformance

10 Year Member

Nov 5, 2006

2,517

61

89

Long Island NY

Dec 28, 2014

#6

• Dec 28, 2014

• #6

FRPP is coming out with a stoker 5.3L short block in a few months. SBC's and Modulars are two different animals. You should've skipped whatever you spent on making 425N/A and just supercharged the car.

 

timjimmy

Active Member

Jul 7, 2013

215

12

29

Clarksville, TN

Dec 29, 2014

#7

• Dec 29, 2014

• #7

I know, it just aggravates me how quality parts are so much more expensive. That and I wish Ford had stuck with the 351. As they say, there is no replacement for displacement. Do you have any details on that 5.3?