Cruise Control Honks Horn

What he said...or if you have done some work on the car recently and forgotten to hook up a ground somewhere that could do it too. Bad grounds can cause some really weird problems. Such as what you mentioned.

I Wouldn;t Usually Take Your Screw Ups To A Shop, They Will Rape You

whiteeuro said:

Not to long ago i put reverse glow gauges in it but i didnt mess with any of the wiring other then the ones coming off the gauges. How hard is it to fix if there is a shorted wire or should i just take it to a shop?

Click to expand...

fixing the wire is easy, finding it is the "hard part". get a wiring schematic, itll take 10 seconds from there. apparently its shorting to power on the horn side, so look for those wires on the schematic.

last time i check the horn wire that connect when u hit the horn its self are ground wires if your installing a different steering wheel and u take the wire to run the horn and ground it out the horn honks. SO with that said when u hit your cruise control it is grounding the horn wire that runs from the wheel to the horn i would defently check for a pinched wire look where u changed the gauges running down the column check all those wire u might of skimmed or pinched them. hope this helps a little
dan