Hello,
I have attached my proposed diagram for my setup. Keep in mind, I bought the system with the car and it came off of a Fox Body 5.0 and is going onto my 1990 5.0 LX hatch. The main line is -8 and the return from the rail to the regulator is -6 fittings. I got all the parts together and they are a little older. They are Aeromotive but the parts dont have parts numbers on them. Pics are attached so any help identifying them would be great. I think the large blue thing is an older style fuel filter and it came with two pumps (they have the "+" and "-" for power on both). So far my engine is N/A and is pushing 350-400hp. Anyways, comments or suggestions would be MUCH appreciated. Should I run a duel pump or single for now? I will put a Vortech on it soon too. Thanks!
Engine:
R302 block - Machined and balanced
Aluminum Heads - Ported with Polished valves (330cfm)
Unsure of Cam (Previous Owner built the engine and couldn't remember)
331 Stroker Kit
Ross Pistons
H Beam Rods (Yes H beam)
28oz flywheel and Balancer
Dyno'd at 400hp on engine dyno
I have attached my proposed diagram for my setup. Keep in mind, I bought the system with the car and it came off of a Fox Body 5.0 and is going onto my 1990 5.0 LX hatch. The main line is -8 and the return from the rail to the regulator is -6 fittings. I got all the parts together and they are a little older. They are Aeromotive but the parts dont have parts numbers on them. Pics are attached so any help identifying them would be great. I think the large blue thing is an older style fuel filter and it came with two pumps (they have the "+" and "-" for power on both). So far my engine is N/A and is pushing 350-400hp. Anyways, comments or suggestions would be MUCH appreciated. Should I run a duel pump or single for now? I will put a Vortech on it soon too. Thanks!
Engine:
R302 block - Machined and balanced
Aluminum Heads - Ported with Polished valves (330cfm)
Unsure of Cam (Previous Owner built the engine and couldn't remember)
331 Stroker Kit
Ross Pistons
H Beam Rods (Yes H beam)
28oz flywheel and Balancer
Dyno'd at 400hp on engine dyno