us amp at 1.33 ohms.
i put some polly fill in there, and there deep as all hell, i have a rear seat delete, ill get some more pix up, no one responded for a while so i thought this tread was dead.strokedandblown said:the box fits, so tight that, if this was a woman id be in jail for 3-6 years.
the amp rack fit in there rially tight, and i drilled a hole in the loop in the botom of the well and put the screw through there, i was very cautious of the fuel tank.

zincyellow03 said:Looks great. :Nice: What inch subs are those?
i could see how you guys thought they were 12"s 


strokedandblown said:yeah, i went out for about 2 hours and had the music loud, the amp that runs the subs went in to shut down. So as you can see in the pic sorta, i added a cooling fan you can see b/c its the only set of wires i didnt fish under the amp rack, b/c i cant get the amp rack out when the subs are in, and i cant get the subs out when the batts. in. and taking the batt out is a bitch![]()
but it fits so im happy..
still have NO traction.strokedandblown said:yeah this one see's lots on new rubber on the backstill have NO traction.
Its just a weekender and sunny day ride, When i go far, I put the spare in the back with jack and stuff.
i could have put the amps under the seat but the way i made the box i wasn't going to be able to get the spare out anyway..
strokedandblown said:Im sure you could get some in there, Ive even built boxes that have been attached under the rear deck.
you can fit lots in there just make it removable, mount the amps on the back seat an make the box so it just snaps in or is strapped in so it comes out ez.
strokedandblown said:if you have a circular saw, jig saw, and drill, you can build your own
use MDF (medium density fiberboard) and 12x12x12=1728 which is 1 cubic foot of airspace, find out what your sub needs and go from there, its soo simple you cant mess it up..