Cylinder Heads,Cams Info.etc..

Stang302h.o · Apr 24, 2009

Well,i got 302boss engine block,331 X7 DSS stroker rotating assembly with -18dish top, inline twisted wedge flycut pistons. Includes DSS 4340 forged 3.25'' stroke crank,DSS forged 5.315'' H-beam rods w/ARP bolts, forged DSS extreme X series pistons, ductile iron moly rings, and tri-metal bearings..Computer balanced to racing tolerances and including chamfered rod bearings for easy assembly..2.1 blowzilla/flowzilla inlet kennebell supercharger,42lb injectors,boost a pump 20amp.

So any ideas about this combo?what heads,cams are good for kb blower?

Thanks,

sn-95matt5-0 · Apr 24, 2009

sounds like you got a killer project goin to far.

really the best thing for you to do to get the most from that set up would be to contact a custom cam grinder(ed curtis from flowtechinduction.com will be doin one for me) and get them to tell you wat heads they think you should use and get them to grind you a cam for the complete package.

but yeah that thing sounds like its goin to be a monster make sure and keep us posted with results.

Stang302h.o · Apr 24, 2009

Thanks,ill contact with them to get custom cam grinder with heads will work with the setup....ill let u guys the updates

revhead347 · Apr 24, 2009

Big head for a blower. Guess it all depends on what you can afford. I guess the biggest affordable head would be a twisted wedge.

Kurt

Cylinder Heads,Cams Info.etc..

Stang302h.o

New Member

sn-95matt5-0

Member

Stang302h.o

New Member

revhead347

Apparently my ex-husband made that mistake.

Similar threads

Cylinder Heads,Cams Info.etc..

Stang302h.o

New Member

sn-95matt5-0

Member

Stang302h.o

New Member

revhead347

Apparently my ex-husband made that mistake.

Similar threads

Privacy & Transparency

Privacy & Transparency