• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Cylinder Numbers... Easy question...

  • Thread starter Thread starter bynummustang
  • Start date Start date Mar 10, 2006

bynummustang

Seen my other Jackstand?
Jul 24, 2005
1
2
69
NC State University
Mar 10, 2006
#1
  • Mar 10, 2006
  • #1
Flame suit on... but i have a remeadlial question about cylinder numbers and firing order...

Can someone number the cylinders below as they actually are?

And then mark the order they fire?
View attachment 484200


:SNSign: :SNSign: :SNSign: :SNSign: :SNSign: :SNSign:
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Mar 10, 2006
#2
  • Mar 10, 2006
  • #2
4 8
3 7
2 6
1 5


Google the H.O. Firing order or pick up your haynes manual.


Edit: Opps.
 

Mavrick

Founding Member
Aug 29, 2002
2,264
0
46
Collingwood, ON
Mar 10, 2006
#3
  • Mar 10, 2006
  • #3
Wrong. Looking at the motor from the front of the car, cylinder #1 is the closest cylinder on the left (passenger side).

4 8
3 7
2 6
1 5

(front of motor here)

HO firing order is 1-3-7-2-6-5-4-8
 

bynummustang

Seen my other Jackstand?
Jul 24, 2005
1
2
69
NC State University
Mar 10, 2006
#4
  • Mar 10, 2006
  • #4
Sweet, thanks. Tomorrow morning I get to find out if I have a bent valve, broken valve spring, bad roller rocker, piston/valve contact, or something else.
 

Rick 91GT

Mustang Master
Nov 29, 1999
9,692
95
99
PA
Mar 10, 2006
#5
  • Mar 10, 2006
  • #5
The cylinders looked oval I think you have other problems....j/k

Do a leak down and compression test and go from there.
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Mar 11, 2006
#6
  • Mar 11, 2006
  • #6
Maybe he's got him one of those rare Honda motorcycle oval-piston engines...
 

bynummustang

Seen my other Jackstand?
Jul 24, 2005
1
2
69
NC State University
Mar 11, 2006
#7
  • Mar 11, 2006
  • #7
Yeah yeah, I just checked what I know how to check, NOT GOOD.

I pulled the TB and intake piping to get the the passenger side valve cover. Pulled it off, hoping to have a clear problem that I can fix. NOPE! Checked all the roller rockers, and valve springs. Everything was fine. None of the RR needed to be shimmed, the springs weren't broken, so my next conclusion is that something is wrong under the head. Valve hitting piston, or valve hitting cylinder wall. Either way, not good.

The heads are 351W heads, but they had worked fine w/o problems for years before now.

What should I check for next?
 

Michael Yount

Mustang Master
Apr 10, 2002
9,039
6
79
Charlotte, NC
Mar 11, 2006
#8
  • Mar 11, 2006
  • #8
Did you pull the rockers and check the pushrods? With pedestal mount rockers and stock pushrods, they will usually bend first in light p to v contact. So you could have contact without anything showing up in the springs/rockers.

Cranking compression check? Have you pulled all the plugs to look for a problem cylinder?
 

bynummustang

Seen my other Jackstand?
Jul 24, 2005
1
2
69
NC State University
Mar 11, 2006
#9
  • Mar 11, 2006
  • #9
Yeah, I pulled all the rockers off, and checked all pushrods.

They all were fine, no bends that I could tell.
 
8

89white50

Member
Nov 16, 2004
440
1
18
central MA
Mar 11, 2006
#10
  • Mar 11, 2006
  • #10
put the pushrods in a drill chuck and spin it, thatll tell you if they are bent really quickly.
 

bynummustang

Seen my other Jackstand?
Jul 24, 2005
1
2
69
NC State University
Mar 11, 2006
#11
  • Mar 11, 2006
  • #11
Well, that will have to wait for another day, in a few hours I leave to go to prom.
 
You must log in or register to reply here.

Similar threads

J
Which cylinder is which? 3.8L 2004
  • joeybuddy96
  • Jul 24, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
162
1996 - 2004 SN95 Mustang -General/Talk- Jul 24, 2026
joeybuddy96
J
B
68 manual disc/drum master cylinder
  • Butchd88
  • May 27, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
0
Views
136
1965 - 1973 Classic Mustangs -General/Talk- May 27, 2026
Butchd88
B
K
Resolved Weird sound coming from a freshly rebuilt 5.0L
  • karhoot
  • Jun 24, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
402
Fox 5.0 Mustang Tech Jun 27, 2026
Mac131
D
Electrical Weird door wiring issues
  • Dakar09
  • Oct 20, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
207
Fox 5.0 Mustang Tech Oct 21, 2026
Dakar09
D
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
733
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?