• Mustang Classifieds
  • SN95 Mustangs For Sale (1994-04)
  • Drivetrain Parts

d&d built Viper spec t56

  • Thread starter Thread starter jtcstrat1
  • Start date Start date Aug 9, 2010
Status
Not open for further replies.

jtcstrat1

Member
Mar 31, 2009
36
0
7
Waterford MI
Aug 9, 2010
#1
  • Aug 9, 2010
  • #1
From my 02 GT. Its a fully built viper spec t56 from D&D

I am looking for interest on this. Thinking of going auto. I bought this trans for 2800, brought it to d&d for them to look at it and ended up spending another grand for the rebuild because it was about to eat itself and needed all new parts.

This trans was in my car for 10ish dyno pulls and about 300 street miles if that. held 600+hp with ease. So this thing is basically brand new still. Have the receipt for the recent rebuild from D&D


Specs:

(trans done 12/1/09, sat for a while)
T-56 viper spec transmission
26 spline viper spec 300M input shaft
30 spline viper spec 300M output shaft conversion
30 spline driveshaft yoke
Bronze 1-2, 3-4 and 5-6 fork pads
Billet 3-4 slider inserts
Hardened throw out bearing guide tube
Carbon syncro rebuild kit
New blocking Rings
New front bearing
New front pocket bearing
LFP 11lb alum. flywheel
Alum. Drive shaft
MGW shifter
Spec Stage 3+ full disc clutch
Steeda adjustable clutch cable
Steeda firewall adjuster
Steeda double hook clutch quadrant
03/04 cross member

I think thats it, Im sure im missing a few things, It has all the best of the best parts, cant get much better.

I have 3800 into it. looking for 3000, so im loosing 800 on the deal. This comes with everything listed, def a good deal. Its sitting in my garage.

also look into 4r70w for partial trade.

I am pretty firm on this since its new and im already taking a hit. Also looking for local pickup, im in MI

thanks

jon
 

jtcstrat1

Member
Mar 31, 2009
36
0
7
Waterford MI
Aug 11, 2010
#2
  • Aug 11, 2010
  • #2
bumpp
 

Blackone51

Member
Oct 30, 2008
201
2
16
Aug 11, 2010
#3
  • Aug 11, 2010
  • #3
Sorry I'll mind my own I read it fast and it was late.
 

jtcstrat1

Member
Mar 31, 2009
36
0
7
Waterford MI
Aug 12, 2010
#4
  • Aug 12, 2010
  • #4
Blackone51 said:
So you paid $2800 and put $1000 to rebuild after you beat it to death and you want 200 more than you paid for it originally. This doesn't make sense to me, well good luck.
Click to expand...

What are you talking about? Beat it to death? It got ran on the dyno and a few hundred street miles... How is that beating it to death? Its not like it got launched at 5k rpm, it was used in the car like the trans is built to do.

I never beat the trans to death and then rebuilt it, i bought the trans from a guy who told me it was built, perfectly fine ect. My car was down over winter when i bought the trans, so before I even installed the trans i brought it to d&d to have them look it over or freshen it up. They looked at it and saw that it had all the good parts but was improperly built, shims were wrong, spacing and tolerance was wrong. so i had them rebuild it before i put it in my car.

I am asking 800 less than i paid/put into it and pretty much brand new still.

Your logic is is retarded, and quite frankley dont appreciate you in my thread and trying to start drama, if you are not interested or have nothing to say please get the **** out. thx.
 

Blackone51

Member
Oct 30, 2008
201
2
16
Aug 12, 2010
#5
  • Aug 12, 2010
  • #5
Sorry I'll mind my own, seems like a good deal. I actually want the T-56 magnum for the 96-98. Good luck with the sale, I have a lot of buddies with mustangs I'll spread the word. So how much off for the partial trade so I know??

Thanks,
James
 

jtcstrat1

Member
Mar 31, 2009
36
0
7
Waterford MI
Aug 13, 2010
#6
  • Aug 13, 2010
  • #6
It all depends on how built their auto is
 

Blackone51

Member
Oct 30, 2008
201
2
16
Aug 13, 2010
#7
  • Aug 13, 2010
  • #7
Well what about stock?
 

jtcstrat1

Member
Mar 31, 2009
36
0
7
Waterford MI
Aug 16, 2010
#8
  • Aug 16, 2010
  • #8
miles? stock converter? drive shaft? cross member?
 

jtcstrat1

Member
Mar 31, 2009
36
0
7
Waterford MI
Aug 25, 2010
#9
  • Aug 25, 2010
  • #9
bump!!!!!
 

jtcstrat1

Member
Mar 31, 2009
36
0
7
Waterford MI
Aug 29, 2010
#10
  • Aug 29, 2010
  • #10
TTT accepting offers
 

jtcstrat1

Member
Mar 31, 2009
36
0
7
Waterford MI
Aug 30, 2010
#11
  • Aug 30, 2010
  • #11
ttt...
 

jtcstrat1

Member
Mar 31, 2009
36
0
7
Waterford MI
Sep 1, 2010
#12
  • Sep 1, 2010
  • #12
sale pending
 

jtcstrat1

Member
Mar 31, 2009
36
0
7
Waterford MI
Sep 9, 2010
#13
  • Sep 9, 2010
  • #13
solddd
 
9

99ElecGreenGT

New Member
Oct 9, 2010
0
0
0
Oct 9, 2010
#14
  • Oct 9, 2010
  • #14
could be interested

i am just about to begin buying parts for my t56 swap... i am intrigued.
 
Status
Not open for further replies.

Similar threads

J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
15
Views
441
SN95 V6 Mustang Tech Yesterday at 1:36 PM
joeybuddy96
J
For Sale D&D Viper Spec T56 for a Fox
  • TexasFireman
  • Aug 25, 2023
  • Drivetrain Parts
Replies
0
Views
1K
Drivetrain Parts Aug 25, 2023
TexasFireman
For Sale Borg Warner WC T5, Stock Bell Housing, RAM Clutch Set, Double Hump Cross Member, & Pro 5.0 Shifter
  • AeroCoupe
  • Aug 9, 2025
  • Drivetrain Parts
Replies
1
Views
566
Drivetrain Parts Dec 26, 2025
AeroCoupe
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
728
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
3
Eight inches is enough for me...
  • 351MooseStang
  • Nov 27, 2025
  • 1974 - 1978 Mustang II Talk & Tech
Replies
5
Views
526
1974 - 1978 Mustang II Talk & Tech Mar 2, 2026
Bullitt347
Share:
Bluesky Email Share Link
  • Mustang Classifieds
  • SN95 Mustangs For Sale (1994-04)
  • Drivetrain Parts
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?