damn

[ju015dd]

i have broken two craftsmen 1/4 in ratchets on the air bleed plug on my 96 cobra. the damn thing will not budge. any ideas on other ways to burp the coolant sys.

 

[bdcardinal]

try something other than craftsman. maybe spray it with PB Blaster or WD40. try using a breaker bar. craftsman arent known for their highest quality. they are alright for the DIY person, but if you mean business, Snap-On, MAC, Matco are the way to go.

 

[ACSPONY]

Craftsman tools are lifetime guaranteed. When they break just take 'em back to sears and get a replacement. FREE
And if they're jerks and don't want to give you a replacement, just beat them with the old one!

 

[ju015dd]

Craftsman tools are lifetime guaranteed. When they break just take 'em back to sears and get a replacement. FREE
And if they're jerks and don't want to give you a replacement, just beat them with the old one!

yeah i know they are guaranteed, just musted be stuck like chuck on there is all. i dont think snap on or mac or anything could break this thing

 

[UVBNHAD]

i have broken two craftsmen 1/4 in ratchets on the air bleed plug on my 96 cobra. the damn thing will not budge. any ideas on other ways to burp the coolant sys.

try something bigger than a 1/4 drive. Get a 3/8'' or 1/2'' and use a reducer if necessary.

 

[ACSPONY]

try something bigger than a 1/4 drive. Get a 3/8'' or 1/2'' and use a reducer if necessary.

Yeah, and get a long breaker bar if you use one. It'll give you more leverage

 

[stangman]

try something bigger than a 1/4 drive. Get a 3/8'' or 1/2'' and use a reducer if necessary.

that with a crap load of PB blaster. good luck with it

 

[ju015dd]

 

[Darkhorse845]

 

[Pughman]

 

[Darkhorse845]