Dash Wiring Harness D-clip

Davedacarpainter

Chicks can make things hard if they’re inspired...

SN Certified Technician

Nov 28, 2015

11,834

11,887

203

Discordia

Jan 8, 2017

#1

• Jan 8, 2017

• #1

Ok y'all, does anyone out there know a cheaper source for these? They hold the main wiring harness as it routes along the backside of the instrument panel. I think I'll need about six or seven of them. The old ones snapped to little pieces when I was pulling the IP out. These are $8 each, they're 3D printed.

I'll be buying these otherwise.

 

CarMichael Angelo

my rearend will smell so minty fresh,

15 Year Member

Nov 29, 1999

10,641

9,253

234

Birmingham, al

Jan 8, 2017

#2

• Jan 8, 2017

• #2

You'll need to know the factory OEM PN, (or you may get lucky, and they'll look it up for you) but the one place in the United States that may have the original versions of those clips will be the same place that sells factory Ford Fairmont side marker lights.
http://www.greensalescompany.com/

 

Boosted92LX

It's only an inch or two. What's the big deal?

15 Year Member

Dec 19, 2010

5,719

4,238

224

Jan 8, 2017

#3

• Jan 8, 2017

• #3

Davedacarpainter said:

Ok y'all, does anyone out there know a cheaper source for these? They hold the main wiring harness as it routes along the backside of the instrument panel. I think I'll need about six or seven of them. The old ones snapped to little pieces when I was pulling the IP out. These are $8 each, they're 3D printed.

I'll be buying these otherwise.

Click to expand...

Hey Dave a buddy of mine has an 84 sitting if you want me to see if it has them?

 

Mstng93SSP

You have a nice rear end there Dave.

15 Year Member

Nov 29, 1999

2,986

3,638

184

Mililani, Hawaii

Jan 8, 2017

#4

• Jan 8, 2017

• #4

At least if you get the 3d printed ones you can use those cool glasses and they will appear to be coming right at you.

 

Reactions: 1 users

CarMichael Angelo

my rearend will smell so minty fresh,

15 Year Member

Nov 29, 1999

10,641

9,253

234

Birmingham, al

Jan 8, 2017

#5

• Jan 8, 2017

• #5

Mstng93SSP said:

At least if you get the 3d printed ones you can use those cool glasses and they will appear to be coming right at you.

Click to expand...

Yes ,.....there's always that.

 

Davedacarpainter

Chicks can make things hard if they’re inspired...

SN Certified Technician

Nov 28, 2015

11,834

11,887

203

Discordia

Jan 8, 2017

#6

• Jan 8, 2017

• #6

Boosted92LX said:

Hey Dave a buddy of mine has an 84 sitting if you want me to see if it has them?

Click to expand...

I appreciate that Allen, but those are probably pretty brittle too.

 

Davedacarpainter

Chicks can make things hard if they’re inspired...

SN Certified Technician

Nov 28, 2015

11,834

11,887

203

Discordia

Jan 8, 2017

#7

• Jan 8, 2017

• #7

Mstng93SSP said:

At least if you get the 3d printed ones you can use those cool glasses and they will appear to be coming right at you.

Click to expand...

I know,right? (Something my older daughter says a lot of)

 

Davedacarpainter

Chicks can make things hard if they’re inspired...

SN Certified Technician

Nov 28, 2015

11,834

11,887

203

Discordia

Jan 8, 2017

#8

• Jan 8, 2017

• #8

madmike1157 said:

You'll need to know the factory OEM PN, (or you may get lucky, and they'll look it up for you) but the one place in the United States that may have the original versions of those clips will be the same place that sells factory Ford Fairmont side marker lights.
http://www.greensalescompany.com/

Click to expand...

Thanks Mike, I'll look into that.

 

RaggedGT

check back later..

Mod Dude

Jul 20, 2014

4,482

3,021

193

Taylorsville ky

Jan 8, 2017

#9

• Jan 8, 2017

• #9

Alright Dave,I struck out on finding your clips... but I did find a site with every 'other' clip you could ever need

http://www.clipsandfasteners.com/mobile/Category.aspx?id=63&page=65

 

Reactions: 1 users