Dent : Can it be popped out?

JonJon

Founding Member

Aug 16, 2002

4,801

1

68

back in Marylands

May 14, 2004

#1

• May 14, 2004

• #1

What is directly behind the door skin? Does this look like it's able to be popped out from the opposite side?

The edge of the door is fine. So is the horizontal edge underneath the door handle.

 

DBMSTNG

I fantasize about it being BIG!

Founding Member

Apr 23, 2002

2,120

0

56

not quite here

May 14, 2004

#2

• May 14, 2004

• #2

look in the phone book for Dent Wizard. they are amazing. they will remove any dent (within reason) for $100.

 

W

White96GTinFla

Banned

Feb 28, 2002

1,075

0

0

Naples, Florida

May 14, 2004

#3

• May 14, 2004

• #3

Yup, I second the Dent Wizzard... they do great work

 

stallion98gt

New Member

May 12, 2003

1,802

0

0

Los Angeles, CA

May 14, 2004

#4

• May 14, 2004

• #4

cool I have a small dent on the driver rear fender..i'll give it a try

 

stallion98gt

New Member

May 12, 2003

1,802

0

0

Los Angeles, CA

May 14, 2004

#5

• May 14, 2004

• #5

check the locator:

http://www.dentwizard.com/locationsusen

 

04DarkShadowGT

Member

Jan 31, 2004

474

0

17

Fort Wayne, IN

May 14, 2004

#6

• May 14, 2004

• #6

man that looks pretty bad for paintelss dent removal but worth a shot.

 

baddest65

Founding Member

Dec 11, 2001

508

0

16

nexus of the universe

May 14, 2004

#7

• May 14, 2004

• #7

dude, for a second there i thought the reflection of the yellow lines on the ground were your graphics. i was gonna ask if you did them yourself...while you were drunk...in the dark...during an earthquake.

 

2k2fourpointsix

New Member

Apr 7, 2003

210

0

0

Quincy, MA

May 14, 2004

#8

• May 14, 2004

• #8

PDR guys can work wonders, a good shop/guy will fix that no problem. Ive seen them fix worse. Its definitly worth a shot, there might be a slight risk of the paint chipping where the metal is creased but go to a good reputable shop.

 

JonJon

Founding Member

Aug 16, 2002

4,801

1

68

back in Marylands

May 14, 2004

#9

• May 14, 2004

• #9

DBMSTNG said:

look in the phone book for Dent Wizard. they are amazing. they will remove any dent (within reason) for $100.

Click to expand...

I found a place, apparently I go there, they look at it, then make an appointment with Dent Wizard people to come fix it.

Sadly, the traffic around that place is horrendous around this time so I'll have to go tomorrow

Thanks

 

JonJon

Founding Member

Aug 16, 2002

4,801

1

68

back in Marylands

May 14, 2004

#10

• May 14, 2004

• #10

2k2fourpointsix said:

PDR guys can work wonders, a good shop/guy will fix that no problem. Ive seen them fix worse. Its definitly worth a shot, there might be a slight risk of the paint chipping where the metal is creased but go to a good reputable shop.

Click to expand...

That's why I think it isn't that bad, nothing seems creased. It looks pretty round. It was hard to get a pic showing the extent of the damage but that angle was best since it showed the reflection of the lines.

Thanks you guys.

 

streetstang03

unModerator

Dec 27, 2003

0

1

0

the dark side of the moon/home of the 1999, 2003,

May 14, 2004

#11

• May 14, 2004

• #11

JonJon said:

I found a place, apparently I go there, they look at it, then make an appointment with Dent Wizard people to come fix it.

Sadly, the traffic around that place is horrendous around this time so I'll have to go tomorrow

Thanks

Click to expand...

that will be sweet if they can just pop it out w/o having to take the panel off or repaint it. good luck with that!!!! i hope its going to work out for ya!

 

2

2002BLGT

Well-Known Member

Dec 18, 2003

2,945

4

59

Bedford VA

May 14, 2004

#12

• May 14, 2004

• #12

not going to pop out with that up and down crease in the sheet metal not that close to the edge anyway , NO WAY , get a new door skin put on it

 

JonJon

Founding Member

Aug 16, 2002

4,801

1

68

back in Marylands

May 14, 2004

#13

• May 14, 2004

• #13

2002BLGT said:

not going to pop out with that up and down crease in the sheet metal not that close to the edge anyway , NO WAY , get a new door skin put on it

Click to expand...

It doesn't look like a crease to me, but I could be wrong


I called a Ford dealer, they said $417 for ONE door skin WTF!!!!
Where can they be gotten for cheaper? That is insane.

Does it look creased? It may not pop out perfect, but it's a 5 year old car, I can live with a little dent versus this bigger one... It's hard to get a good pic to show the depth. Regardless, I'll go talk to the Dent Wizard rep people tomorrow, see what they recommend...

 

streetstang03

unModerator

Dec 27, 2003

0

1

0

the dark side of the moon/home of the 1999, 2003,

May 14, 2004

#14

• May 14, 2004

• #14

JonJon said:

It doesn't look like a crease to me, but I could be wrong


I called a Ford dealer, they said $417 for ONE door skin WTF!!!!
Where can they be gotten for cheaper? That is insane.

Does it look creased? It may not pop out perfect, but it's a 5 year old car, I can live with a little dent versus this bigger one... It's hard to get a good pic to show the depth. Regardless, I'll go talk to the Dent Wizard rep people tomorrow, see what they recommend...

Click to expand...

just get ahold of this guy and get it done through his insurance company if u get some bad news after u go visit those ppl tomorrow. take it to the shop of ur choice too if it needs a new door skin/paint.