• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

Detroit Locker for 8"

  • Thread starter Thread starter Bizystang
  • Start date Start date May 7, 2004
B

Bizystang

Founding Member
Apr 11, 2001
77
0
0
Norman OK
May 7, 2004
#1
  • May 7, 2004
  • #1
I am looking for a manufacturer for a detroit locker for an 8". I have looked around but no dice. I don't really care who the manufacturer is. I heard bad things about the lock right, but if anyone has any experiences with those please tell. Thanks
 

Gummi Bear

New Member
Sep 29, 2003
86
0
0
Arlington, Texas
May 7, 2004
#2
  • May 7, 2004
  • #2
Bizystang said:
I am looking for a manufacturer for a detroit locker for an 8". I have looked around but no dice. I don't really care who the manufacturer is. I heard bad things about the lock right, but if anyone has any experiences with those please tell. Thanks
Click to expand...


Honestly, there isn't much available for the 8", it's really pretty weak comparatively. Look into an 8.8" or a 9"(best bet) and there is tons of stuff available for them. Look toward the 4x4 crowd for information on this.

Google produced a quick list of locking differentials.Here

Lockers are pretty funky, they will load and unload on you unexpectedly. If you are straight line racing, they kick ass, if you are gonna be making any turns, look for a selectable locker. ARB, Eaton, Electrac, and others make selectable lockers, and all can be converted to be a cable driven lock. ARB requires air, Eaton and Electrac both are electronically activated.

Detroits load and unload, under acceleration they are locked (loaded) and when you let off the accelerator (like in a turn) they unload, if you are driving hella fast, and rounding a turn, it can sling you into another lane. Pay attention.
 

KillerKittyCat

New Member
Aug 24, 2003
150
0
0
Hammer Down - Behind The Wheel
May 7, 2004
#3
  • May 7, 2004
  • #3
I went with Auburn gears in my Mustang.

Check this info out.

http://www.auburngear.com/aftermarket/common/literature/truestory.pdf
 
N

nosaj122081

New Member
Mar 5, 2003
202
0
0
West Virginia
May 7, 2004
#4
  • May 7, 2004
  • #4
Actually, with my locker experience I'd say they are EXTREMELY predictable... I know exactly when mine would lock or unlock, and that can be used to your advantage. They make the car understeer if you go into a turn locked but I never got into a situation where I felt that it was causing the car to be outta control, just a little bit of understeer even when I was running the hell out of it
 

Gummi Bear

New Member
Sep 29, 2003
86
0
0
Arlington, Texas
May 7, 2004
#5
  • May 7, 2004
  • #5
nosaj122081 said:
Actually, with my locker experience I'd say they are EXTREMELY predictable... I know exactly when mine would lock or unlock, and that can be used to your advantage. They make the car understeer if you go into a turn locked but I never got into a situation where I felt that it was causing the car to be outta control, just a little bit of understeer even when I was running the hell out of it
Click to expand...


Jason -

Are you running a true locker, or a posi-trac type of unit? A 'hard' locker like a Detroit will unload, they're the ones to look for. A posi unit is a bit different.
 
N

nosaj122081

New Member
Mar 5, 2003
202
0
0
West Virginia
May 7, 2004
#6
  • May 7, 2004
  • #6
Just a standard Deroit Locker for a 9". Its the same design as the old ones but its been revamped so that its not as clunky as the older ones. When I go into turns with it locked I make a concious effort to not let it unlock, that way it just wants to plow a little.
 
B

Bizystang

Founding Member
Apr 11, 2001
77
0
0
Norman OK
May 7, 2004
#7
  • May 7, 2004
  • #7
Honestly, there isn't much available for the 8", it's really pretty weak comparatively. Look into an 8.8" or a 9"(best bet) and there is tons of stuff available for them. Look toward the 4x4 crowd for information on this.
Click to expand...

Despite the 8" being so small it is pretty sturdy, and will easily handle the power I have. Besides that it is 100lbs lighter than the 9". So without replacing my rear end there is no detroit locker for an 8"?
 
K

kyle67

New Member
Jun 28, 2003
60
0
0
Baton Rouge, LA
May 7, 2004
#8
  • May 7, 2004
  • #8
Why not get an Auburn Pro posi?
 

Gummi Bear

New Member
Sep 29, 2003
86
0
0
Arlington, Texas
May 7, 2004
#9
  • May 7, 2004
  • #9
nosaj122081 said:
Just a standard Deroit Locker for a 9". Its the same design as the old ones but its been revamped so that its not as clunky as the older ones. When I go into turns with it locked I make a concious effort to not let it unlock, that way it just wants to plow a little.
Click to expand...


OK, I gotcha now. (the 'soft' locker)

With the roll of big tires (35" and up) they will unlock on ya, but they can also on smaller street tires if you don't stay in the gas.
 

Gummi Bear

New Member
Sep 29, 2003
86
0
0
Arlington, Texas
May 7, 2004
#10
  • May 7, 2004
  • #10
Bizystang said:
Despite the 8" being so small it is pretty sturdy, and will easily handle the power I have. Besides that it is 100lbs lighter than the 9". So without replacing my rear end there is no detroit locker for an 8"?
Click to expand...


100Lbs is a pretty liberal estimate, but you may right about that, I always thought the 9" was pretty light, especially when compared to the likes of a Dana 60 or something.

Anyhow, here's a quick list of 8" lockers. Moser is excellent stuff. Look at Currie, and Randy's Ring and Pinion to have stuff too. Avoid Drivetrain Warehouse like the plague. Personally I buy that kind of stuff through a local shop, I am able to get decent service, pricing, and someone to cry to when it doesn't work like it should

Quick List

Detroit is a reputable manufacturer, and Jason seems to like his pretty well, and I really like them (but I do run 35" tires). You will have to adjust your driving style going from a open to a locked differential, things can get out of hand in a hurry if you don't pay attention. Auburn is good stuff, though they aren't real popular in the off-road market.
 

coolblue65

Founding Member
Jul 26, 1999
1,224
2
39
Algonquin, IL
May 7, 2004
#11
  • May 7, 2004
  • #11
You may want to look into the Powertrax unit. It's a locker of sorts that takes the place of the spider gears. Its a very easy install actually. The only draw back is the clicking you hear from the racheting action on slow turns. I bought it from summit for like $400 i think.
 
D

Doc Voodoo

Founding Member
Mar 2, 2001
257
0
0
Conn
May 7, 2004
#12
  • May 7, 2004
  • #12
CE-5010 $79.95 8" 28 spline Open Differential (Rebuilt)
CE-5015 $389.95 8" 28 spline Traction Lock
CE-5005 $449.95 8" 28 spline Detroit Locker
CE-5023 $389.95 8" 28 spline 4 Spider T.S.D.
CE-5023E $339.95 8" 28 spline 2 Spider T.S.D.
CE-5025 $389.95 8" 28 spline Auburn
CE-5016 $39.95 8" 28 spline Mini Spool


these are at Currie as you can see there is one for an 8inch
cheak them out but the best prices and the place i got my rear end stuff from is MAE raceing

http://www.andale.com/stores/sf_home.jsp?mode=1&sfUrl=maeracing

http://www.currieenterprises.com/html/custom/8inch/rearend8FordThirdMemberParts.htm
 
You must log in or register to reply here.

Similar threads

3
393W Stroker with Boost - Need Spark Plug Recommendations
  • 387lx
  • Apr 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
262
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 30, 2026
HotFox
S
01 GT DRIVERS SIDE DOOR LOCK CYLINDER LINKAGE
  • Scwhitten
  • May 13, 2026
  • SN95 4.6L Mustang Tech
Replies
3
Views
126
SN95 4.6L Mustang Tech Jun 19, 2026
melo.timo
M
G
Auto City Classics 67-70 Mustang disc brake kit question/s
  • GOvert
  • Jun 30, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
0
Views
42
1965 - 1973 Classic Mustangs -General/Talk- Jun 30, 2026
GOvert
G
Weber Carburetor tuning help
  • SchwarzStock
  • Monday at 7:46 AM
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
3
Views
34
1965 - 1973 Classic Mustangs -General/Talk- Yesterday at 2:59 AM
SchwarzStock
A
Help ID - Turbo GT, SVO differences
  • aldoelmalo
  • Jun 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
69
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 2, 2026
aldoelmalo
A
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?