• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

differences between an 84 and an 87

  • Thread starter Thread starter rockingchair69
  • Start date Start date Jul 24, 2006
R

rockingchair69

New Member
Jun 21, 2005
23
0
0
Jul 24, 2006
#1
  • Jul 24, 2006
  • #1
So I had a few question about a few things I heard . I was wondering if you could use 87 and up struts and what the difference was. I had also heard that the design of the strut towers/inner fenders where also changed I was wondering whats diff and could I use the stuff on my car? I had also heard that the master cylinder brake lines and proportioning valve are different in my car and aren't really compatable with anything. So I had this idea where I would just use everything out of the 93 cobra master cylinder prop valve power booster as well as the hard lines. Will this work? thanks in advance
 

srothfuss

Last night I stabbed the same guy 7 times in a row
Oct 17, 2004
1,796
3
0
Woodward Ave.
Jul 24, 2006
#2
  • Jul 24, 2006
  • #2
You can run 87+ struts if you get the 87+ spindles and calipers (or the 73mm SVO units)

The difference in the MC is the type of valve. One uses a shuttle valve and the other doesn't. I think I read on www.mustanggt.org about the differences.
 

SVT32VDOHC

waiting for the next hack atta
Founding Member
Nov 22, 2001
3,501
28
119
Motor City
Jul 24, 2006
#3
  • Jul 24, 2006
  • #3
srothfuss said:
You can run 87+ struts if you get the 87+ spindles and calipers (or the 73mm SVO units)

I will second that!!
Click to expand...
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Jul 24, 2006
#4
  • Jul 24, 2006
  • #4
It is a good upgrade since the rotors for the 87+ are bigger then the 79-86's. This is an upgrade i have to do to my 86 soon.
 

PuterAmI

Member
Mar 29, 2003
513
0
16
Madison, Alabama
Jul 24, 2006
#5
  • Jul 24, 2006
  • #5
I have the 87-93 spindles and 73mm calipers/pads with Tokico Illuminas and other stuff on my 84. You need to go read Matt Bobbit's brake page and find all the info that you need for upgrading.
 
You must log in or register to reply here.

Similar threads

Fox Brake pedal too stiff
  • keel
  • Sep 21, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
33
Views
993
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 11, 2026
keel
B
68 manual disc/drum master cylinder
  • Butchd88
  • May 27, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
0
Views
136
1965 - 1973 Classic Mustangs -General/Talk- May 27, 2026
Butchd88
B
R
Fox Hydroboost conversion/proportional valve
  • RubyRedNotch
  • Jul 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
128
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 20, 2026
RubyRedNotch
R
Brakes FOX BRAKES ISSUES
  • PonyGTrider
  • Jan 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
53
Views
3K
Fox 5.0 Mustang Tech Jan 31, 2026
Mustang5L5
Engine Suggestions on an engine rebuild. Stock cam/GT40Ps or aftermarket on both for a fun weekend driver?
  • MadSquirrelTech
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
23
Views
1K
Fox 5.0 Mustang Tech May 7, 2026
MadSquirrelTech
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?