• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Distributor cap wobble

  • Thread starter Thread starter ARTTII
  • Start date Start date Jul 12, 2006
A

ARTTII

New Member
Jan 13, 2004
272
2
0
Detroit, MI
Jul 12, 2006
#1
  • Jul 12, 2006
  • #1
I have a 93 lx 5.0 - the distributor cap seems to wobble around and not sit flat, am I missing something??

I have a remanufactured distributor, new cap and rotor, but original adapter. Should I try replacing the adapter? If so is that something I can pick up at autozone or Napa?

Thanks
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jul 12, 2006
#2
  • Jul 12, 2006
  • #2
It doesnt wobble while the car idles, right? It's just that you can put your hand on the cap and move it around a little?

If so, mine do that too. I dont know why the cap isnt located with screws (a la GM, etc) or at least locating pins (if they wanted to keep the straps that are used now).

Good luck.
 

Saleen0679

10 Year Member
Apr 14, 2005
876
24
49
Yakima, WA
Jul 12, 2006
#3
  • Jul 12, 2006
  • #3
If the cap has been removed often the spring tension clips can get a little loose and create some slop. Because of the clip design you'll be able to move the cap around, but you shouldn't be able to without at least a little bit of force.

The cap base with billet aluminum screw hold down clamps made for the 95 Cobra 'R' is available from PPI for $35.
 
A

ARTTII

New Member
Jan 13, 2004
272
2
0
Detroit, MI
Jul 12, 2006
#4
  • Jul 12, 2006
  • #4
HISSIN50 said:
It doesnt wobble while the car idles, right? It's just that you can put your hand on the cap and move it around a little?

If so, mine do that too. I dont know why the cap isnt located with screws (a la GM, etc) or at least locating pins (if they wanted to keep the straps that are used now).

Good luck.
Click to expand...

Yea, only when you put your hand on it (I think, hope it is not moving while the engine idles)

What a cheap design... OK thanks for the info
 
You must log in or register to reply here.

Similar threads

Distributor installed wrong
  • djj62478
  • Jun 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
351
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
Engine Hiccup at full throttle
  • keel
  • Jun 2, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
31
Views
1K
Fox 5.0 Mustang Tech Jul 30, 2026
keel
Engine Defective PIP sensor ?
  • bock
  • Sep 5, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
20
Views
2K
Fox 5.0 Mustang Tech Oct 11, 2025
Mindseye007
K
Resolved Weird sound coming from a freshly rebuilt 5.0L
  • karhoot
  • Jun 24, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
408
Fox 5.0 Mustang Tech Jun 27, 2026
Mac131
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
533
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?