• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2.3L (N/A & Turbo) Tech

do 5.0 trannys fit??

  • Thread starter Thread starter boxcarracer89
  • Start date Start date Jul 15, 2010
B

boxcarracer89

Member
Mar 26, 2009
153
0
16
I live in Roswell NM
Jul 15, 2010
#1
  • Jul 15, 2010
  • #1
I was gonna pick up an 84 mustang svo but it has a blown tranny, i was wondering if the trannys from the 5.0s fit on the svos?? I know they fit on the regular 4 cyl but i wasnt sure if the turboed 4s were different, thanks guys!!
 
B

boxcarracer89

Member
Mar 26, 2009
153
0
16
I live in Roswell NM
Jul 15, 2010
#2
  • Jul 15, 2010
  • #2
Sorry guys I found it, they take t5s.
 

Red_LX

I’m not much help unless you’re looking for ****!
Founding Member
Nov 29, 1999
5,896
73
129
Morgantown, WV...where couches meet their doom
Jul 16, 2010
#3
  • Jul 16, 2010
  • #3
Actually you need either a special pilot bushing to put a 5.0 T5 behind a 2.3L, or you have to turn down the nose on the input shaft so that it will fit the stock pilot bearing. I don't know about the clutch situation there though.

Additionally, the 5.0 T5's .68 overdrive would be tough to live with behind a 2.3L. 2.3 T5's have a .81 overdrive.
 
B

boxcarracer89

Member
Mar 26, 2009
153
0
16
I live in Roswell NM
Jul 16, 2010
#4
  • Jul 16, 2010
  • #4
ok thanks!! do u know where I could get one for an svo??
 

Red_LX

I’m not much help unless you’re looking for ****!
Founding Member
Nov 29, 1999
5,896
73
129
Morgantown, WV...where couches meet their doom
Jul 20, 2010
#5
  • Jul 20, 2010
  • #5
Get what, the bushing?

I'm not sure who all makes it, I know that Rapido Group does...I was thinking there was another company but I'm not sure.
 

CarMichael Angelo

my rearend will smell so minty fresh,
15 Year Member
Nov 29, 1999
10,641
8,909
234
Birmingham, al
Jul 22, 2010
#6
  • Jul 22, 2010
  • #6
Stinger performance actually makes an adapter plate that will allow you to mate the larger bellhousing from a V8 to your motor. Then you'll have the benefit of a larger flywheel, (gotta buy theirs) clutch and what ever transmission your back pocket will allow.
 
B

boxcarracer89

Member
Mar 26, 2009
153
0
16
I live in Roswell NM
Jul 23, 2010
#7
  • Jul 23, 2010
  • #7
o no. its gonna be for my gf, so I just needed a tranny for the svo, would u know where I could get a 4cyl tranny?
 
You must log in or register to reply here.

Similar threads

S
1965 Mustang with 80s 5.0 engine in it Power Steering hose or connection ID?
  • spearce
  • May 19, 2026
  • Classic Mustang Specific Tech
Replies
2
Views
74
Classic Mustang Specific Tech Jun 8, 2026
AeroCoupe
J
88 Foxbody 5.0 Driveshaft Issue! Need Help
  • James Hood
  • May 1, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
457
Fox 5.0 Mustang Tech May 1, 2025
AeroCoupe
K
3.8 T5 & Bellhousing to 1987 Lincoln 5.0
  • ks65stang
  • Mar 2, 2026
  • Other Auto Tech
Replies
3
Views
264
Other Auto Tech Mar 3, 2026
Noobz347
1
Engine Motor swap from a 2003 Explorer
  • 1996mustang new
  • Oct 9, 2025
  • SN95 4.6L Mustang Tech
Replies
7
Views
543
SN95 4.6L Mustang Tech Oct 16, 2025
squeak93
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2.3L (N/A & Turbo) Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?