It's a 98 GT 5 speed that I bought with Maximum Motorspots Heavy Duty Lower Control Arms already installed. After a year of hard launches the poly bushing on the chassis end of the LCA shred. When I spoke to Maximum and ordered replacement poly bushings he said it would happen again and suggested i go with their Extreme Duty LCA's because they have the non-poly bushings at both ends. Well he was right...at about the year mark the replacement set of poly bushings shred also.
I asked on another forum if my only option was to go with LCA's that had spherical bushings at both ends. I got a couple replies that said I should just replace the poly with spherical bushings instead of completely new control arms. Well I spent quite a bit of time googling to find replacement spherical lower control arm bushings and cannot find a source…nor could the posters that suggested it point me to a source...do they exist? If so, can someone please tell me where I can find them!
I asked on another forum if my only option was to go with LCA's that had spherical bushings at both ends. I got a couple replies that said I should just replace the poly with spherical bushings instead of completely new control arms. Well I spent quite a bit of time googling to find replacement spherical lower control arm bushings and cannot find a source…nor could the posters that suggested it point me to a source...do they exist? If so, can someone please tell me where I can find them!