Steeda for $69.95 (04 catalog) They say 2-3 HP but most people say not to waste your money.This is probably with the stock intake in place.I believe that if they did anything the aftermarket elbow makers would have them built into their designs.Save your money and get a T/B-plenum combo.They're good for about 13-14 RWHP with the 75mm making 2 HP over the 70mm as tested by MM&FF.
Seems to me I've seen them on eBay before.. have you checked the other normal places? Mustangsunlimited, Texas Mustang, Dallas Mustang, BBK, Mac, Mustangtuning, etc?
Airraid makes one but it is for 03-04 GT's. There is no differnce of plenum or throttle bodies from my 98. I am going to order that one I guess. I can always send it back. (I work at Napa LOL)
Airraid makes one but it is for 03-04 GT's. There is no differnce of plenum or throttle bodies from my 98. I am going to order that one I guess. I can always send it back. (I work at Napa LOL)
I may be mistaken but I think there is a difference in throttle bodies from your 98 to the 03-04's. I think the 1998 has a 65mm TB and the 03-04 have 70mm.
You know, sometimes I wonder, at what point did certain people get left behind during the internet revolution? Try SEARCHING the internet, that's what google, yahoo, dogpile, etc are for.
After I posted those 4 or 5 places to look, you posted back saying yep, no one makes one. In a matter of less than 15 seconds, I did a search on google, found at least a thousand something sites that carry them, 4 of which I clicked on, and saw an actual picture, and price. Then I did an ebay search, and found several that specifically mention your year, most of which are available for buy it now.
I don't know what gains there are to be had from a throttle body spacer, as I don't know of anyone who uses one personally. I've done numerous searches here, and on various other Mustang boards. I know many people say they don't make any power, but then again the same thing was said about intake spacers, until someone actually did some dyno tests with them.