• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Does removing the smog pump cause trouble codes?

  • Thread starter Thread starter leakyfaucet
  • Start date Start date Mar 13, 2004
L

leakyfaucet

Member
Dec 19, 2003
273
0
16
North Carolina
Mar 13, 2004
#1
  • Mar 13, 2004
  • #1
Hi, I recently checked my engine codes and got the codes 41, 81, and 91.

The 41 and 91 are from the oxygen sensors not working. I can verify this with terrible mileage and black tailpipes. The 81 is from the "thermactor air circuit." I have removed my smog pump and plugged the lines. I was wondering if anyone else has done this and got the code 81. I ask because the oxygen sensors are good, and I am thinking that if the TAB and TAD are bad it might cause the oxygen sensors not to switch on. Any truth to this?
 
L

leakyfaucet

Member
Dec 19, 2003
273
0
16
North Carolina
Mar 13, 2004
#2
  • Mar 13, 2004
  • #2
bump
 

89MustangGX

I have nothing productive to add!
Jul 3, 2001
10,262
1
0
Mill Creek, WA
Mar 13, 2004
#3
  • Mar 13, 2004
  • #3
Not having the pump will throw the thermactor code, but causes no other side effects.
 

latham83

New Member
Jul 24, 2003
496
0
0
Mar 14, 2004
#4
  • Mar 14, 2004
  • #4
i got rid of my pump and and all the tubing and didnt get a code?
 

89MustangGX

I have nothing productive to add!
Jul 3, 2001
10,262
1
0
Mill Creek, WA
Mar 14, 2004
#5
  • Mar 14, 2004
  • #5
latham83 said:
i got rid of my pump and and all the tubing and didnt get a code?
Click to expand...

It won't trip a light, but it will throw a code. If you run your codes you will see it (maybe #83??).
 
E

eagle87

Member
Apr 30, 2003
62
0
6
New York
Mar 14, 2004
#6
  • Mar 14, 2004
  • #6
I also have 41,91. I have removed the air pump also, I would like to know more about this becuase 41 and 91 read that the motor is LEAN. If somebody could explain further.
 
9

90stangLX302

New Member
Dec 2, 2003
76
0
0
Good ol' Bellaire Ohio
Mar 14, 2004
#7
  • Mar 14, 2004
  • #7
After i removed my smog pump,... i have smoke when i start the car up and right at first when i gas it. I also added GT-40P heads at the same time. I dont know if it's related or not but i was just curious
 
L

leakyfaucet

Member
Dec 19, 2003
273
0
16
North Carolina
Mar 14, 2004
#8
  • Mar 14, 2004
  • #8
89MustangGX said:
It won't trip a light, but it will throw a code. If you run your codes you will see it (maybe #83??).
Click to expand...

Mine threw an 81 for the "thermactor air circuit".

eagle87 said:
I also have 41,91. I have removed the air pump also, I would like to know more about this becuase 41 and 91 read that the motor is LEAN. If somebody could explain further.
Click to expand...

It means either lean or not switching on. Based on the fact that I have terrible gas mileage and black tailpipes (not to mention the rich smell) I'm going to have to guess that mine just aren't turning on.
 

9350notch

New Member
Dec 31, 2001
33
0
0
Boston, MA
Mar 14, 2004
#9
  • Mar 14, 2004
  • #9
My air pump is making a strange noise, that is rpm sensitive. It gets louder when you rev the engine. I can only describe the noise as a whirring noise, and I was wondering if this noise is normal or is something bad?? I was also thinking of removing it completely. Does this cause you to fail emissions, or any other side effect??
 
J

jester111

New Member
Mar 3, 2004
34
0
0
Toronto, Ca
Mar 14, 2004
#10
  • Mar 14, 2004
  • #10
hi
I just went through chasing down codes and i also had 41,91,81, check the tad solonoids located on the pass side shock tower mine were cracked, replaced both all codes gone. the 41,91 were false codes due to the code 81.
hope this helps
 
E

eagle87

Member
Apr 30, 2003
62
0
6
New York
Mar 14, 2004
#11
  • Mar 14, 2004
  • #11
Thanks for the help I think thats why I also have those codes.
 
You must log in or register to reply here.

Similar threads

M
Progress Thread 1993 Ford Mustang 5.0 convertible stock manual - ODB Codes shows running lean
  • mcalvo
  • Feb 11, 2025
  • Fox 5.0 Mustang Tech
  • 2
Replies
20
Views
1K
Fox 5.0 Mustang Tech Feb 22, 2025
AeroCoupe
Engine Ran my code reader and
  • Mindseye007
  • Aug 10, 2024
  • Fox 5.0 Mustang Tech
Replies
3
Views
575
Fox 5.0 Mustang Tech Aug 19, 2024
Mindseye007
C
Engine Code 94 and 13
  • CmdrDerp
  • Nov 3, 2024
  • Fox 5.0 Mustang Tech
Replies
3
Views
317
Fox 5.0 Mustang Tech Nov 4, 2024
AeroCoupe
Engine 1990 LX 5.0L EFI Mustang Fuel Management Problems - HELP!
  • 5.0LXStanger
  • May 25, 2025
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
45
Views
2K
Fox 5.0 Mustang Tech Jul 11, 2025
5.0LXStanger
J
Thanks for the information on codes 31,34,44 and 94!
  • JK86LX50
  • Mar 5, 2025
  • The Welcome Wagon
Replies
3
Views
264
The Welcome Wagon Aug 5, 2025
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?