does this sound good? (rearend)

Modular2v · Apr 19, 2004

how does this sound good for my rearend build up guys? Moser 31 spline axels, eaton posi, and 3.73 gears. My car only has 10k miles on it so do you think i will need to buy a new shim kit for it? I wouldnt be building my rear up but 3 weeks ago at the track my car started to only spin one tire so i figured what the hell. Any suggestions or info you guys could provide feel free to share.
Thanks,
Kenny

MAC[H]Z · Apr 19, 2004

I have a mach1 and I just installed 4.30's 31 spline moser axles, 31 spline FRPP trak lok and I also installed all new bearing and seals...I'm sure it was overkill but for $100 it was worth it to me....

Modular2v · Apr 19, 2004

anyone else? thanks mach how does it run?

Modular2v · Apr 19, 2004

bump...also what do u guys think about buying used gears with 1000 miles on them?

GinoGT · Apr 19, 2004

Sounds like a good setup, just needs a bigger gear.

Personally, I wouldn't buy used gears. They're not that expensive, plus you don't know if there was a crappy install job on them. Gears can be picky little bastards, so I would buy new just to help eliminate any possibilities of something going wrong.

Modular2v · Apr 19, 2004

a bigger gear huh? nah i like low rpms

GinoGT · Apr 19, 2004

RED98Z28 said:
a bigger gear huh? nah i like low rpms

Don't fear it.

KaPPaBaLL · Apr 20, 2004

GinoGT said:
Don't fear it.

i guess he likes slower times too

Go HoTO! · Apr 20, 2004

Look, I fretted for months over which gear to go with on my '00 GT. I even bought 3.73's and them shipped them back for the 4.10's. I would have been pissed with the 3.73's. In fact, next time, I will go with 4.30's. Don't fear the gear!

In my case, though, my Mustang is a third car. If this were not the case, then I would have stayed with the 3.73. However, in retrospect, 4.10's would have been fine if I were driving the car all day.

MAC[H]Z · Apr 20, 2004

RED98Z28 said:
anyone else? thanks mach how does it run?

Best mod yet by far..... I love the 4.30's it turns 2400 at 70 mph so it's no big deal

Dark Knight GT · Apr 20, 2004

If youre going to be doing a rear end rebuild like you've explained, Ide get a shim kit just to be on the safe side. After all, you are replacing the axles, differential, ring gear, pinion gear, pinion nut, and crush sleeve already. Might as well get the whole install kit and call it a day.

I agree about the 4.30 gear statement. I have my 4.30 gears waiting install. Just cant get these a-holes to send my new ABS exciter rings.

Modular2v · Apr 20, 2004

with a t3650 transmission and 4.10s what rpm would i be turning at 75 mph I dont go over 75 anywhere else but the track and most of the time i dont go over 70

JOHNS01GT · Apr 20, 2004

RED98Z28 said:
with a t3650 transmission and 4.10s what rpm would i be turning at 75 mph I dont go over 75 anywhere else but the track and most of the time i dont go over 70

I have an early 01, so we have different tranny's but my 4.10's are turning about 2700 rpmish @ 75mph.

Modular2v · Apr 20, 2004

does anyone know what a t3650 would be turning at around 70mph with 4.10s

GinoGT · Apr 20, 2004

RED98Z28 said:
does anyone know what a t3650 would be turning at around 70mph with 4.10s

2500

People need to stop whining when it comes to gears. OMGWTFBBQ! I'm turning 3000 on teh highway....OH NOES!!!

Get the gears, go on the highway, and after 5 minutes you'll realize how amazingly stupid your concerns were. Then when you floor it for the first time, you realize you would want to shoot yourself in the eye if you went with anything less.

KaPPaBaLL · Apr 20, 2004

GinoGT said:
2500

People need to stop whining when it comes to gears. OMGWTFBBQ! I'm turning 3000 on teh highway....OH NOES!!!

Get the gears, go on the highway, and after 5 minutes you'll realize how amazingly stupid your concerns were. Then when you floor it for the first time, you realize you would want to shoot yourself in the eye if you went with anything less.

why do i always agree with this guy

Dark Knight GT · Apr 20, 2004

KaPPaBaLL said:
why do i always agree with this guy

I got a couple more "buns" in this Burger King bag KaPPaBaLL, want to kiss them ?

KaPPaBaLL · Apr 20, 2004

bwahhaa, good to see you too. i like that guy that made a quack sound after the girl licked that other guy's face. bwahhhh

steven holt · Apr 20, 2004

maybe i am stupid, but could anybody tell me the difference in gears? what is all the hub about anyway?

steven holt · Apr 20, 2004

Did I scare everyone off?

does this sound good? (rearend)

Modular2v

MAC[H]Z

New Member

Modular2v

Modular2v

GinoGT

Modular2v

GinoGT

KaPPaBaLL

New Member

Go HoTO!

New Member

MAC[H]Z

New Member

Dark Knight GT

I can't get it up......ok that didn't sound right.

Modular2v

JOHNS01GT

New Member

Modular2v

GinoGT

KaPPaBaLL

New Member

Dark Knight GT

I can't get it up......ok that didn't sound right.

KaPPaBaLL

New Member

steven holt

New Member

steven holt

New Member

Similar threads

does this sound good? (rearend)

New Member

New Member

New Member

New Member

I can't get it up......ok that didn't sound right.

New Member

New Member

I can't get it up......ok that didn't sound right.

New Member

New Member

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency