Ok, here is an indepth description of my problem.
The dome light comes on without the switch interior light switch being turned on, (all the way to the left and then the click). With the light switch in any other poistion the dome light works properly. Turn it all the way to left dome light comes on and then turning the switch off it turns off. With the brights on, I also do not have this problem. Here is what i have done so far.
Checked the voltages on the light switch. D1 and D2 work properly on all modes of the switch. On D2, however, when the normal driving lights are turned on, i get a 4.5-5.2 volt feedback on D2, dome light relay, when there should be zero. I believe that this is keeping the keyless entry module powered so that the light stays on. Im not sure where the extra voltage could be coming from. Any suggestions welcome!
Thanks,
Chris
The dome light comes on without the switch interior light switch being turned on, (all the way to the left and then the click). With the light switch in any other poistion the dome light works properly. Turn it all the way to left dome light comes on and then turning the switch off it turns off. With the brights on, I also do not have this problem. Here is what i have done so far.
Checked the voltages on the light switch. D1 and D2 work properly on all modes of the switch. On D2, however, when the normal driving lights are turned on, i get a 4.5-5.2 volt feedback on D2, dome light relay, when there should be zero. I believe that this is keeping the keyless entry module powered so that the light stays on. Im not sure where the extra voltage could be coming from. Any suggestions welcome!
Thanks,
Chris