Door handes (inside and out) hard to open...suggestions?

I've dealt with this and now I'm ready to actually do something about it. My door handles are hard to open on the inside and outside. I know Mustang door handles aren't the best and are often not the easiest to open, but I feel like i'm gonna break my handles (they're steel replacements, so I'm good) when I try to open the door.

To solve the problem for the outside handle, I tried sliding a small nut over the rod where it rests on the little curve in there that the handle uses to push down on the rod..well the nut (and everything else i've tried) manages to work it's self around the bend in the metal and I'm back to square one. Anyone successfullly fixed this?

Not only that, but the inside handle is the same way. I feel like I'm going to break the handle before I can get it open. Sometimes it seems easier than others, but usually, I have to apply pressure at certain places or it won't open. Has anyone else experienced this and came up w/ a solution?

There's not much room in there, so I don't know how to fix these problems.

Anyone?

HISSIN50 said:

James, I have had several cars like this, including the 88. i simply bent the long rod a little (or straightened it - I cant remember which it was on the stang. when you look at it, it will be intuitive) and that makes it open like a champ.

this was only for the inner door handle though - not sure on the outer. good luck.

Click to expand...

I swear I thought about that when I looked in there and saw the rod all bent, but it looked like it was bent to kinda go along w/ the shape of the door inside there. I'll see what I can do