• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Door Panels

  • Thread starter Thread starter savegoodautonfg
  • Start date Start date Nov 2, 2006
  • 1
  • 2
Next
1 of 2 Next Last
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Nov 2, 2006
#1
  • Nov 2, 2006
  • #1
My door panels are pretty beat up like the carboard type stuff on the back of the door panel that the clips go into.

What is that stuff really called and where could i get it.?
 

bubba-dough

Active Member
Dec 28, 2004
1,044
2
38
Indiana
Nov 2, 2006
#2
  • Nov 2, 2006
  • #2
http://www.latemodelrestoration.com/products.aspx?category=M1DRPANEL
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Nov 2, 2006
#3
  • Nov 2, 2006
  • #3
Ok, i dont want to buy them..

I want the carboard type stuff that they have on them.
 
W

wicked84gt350

New Member
Aug 20, 2006
113
1
0
West palm bech florida
Nov 2, 2006
#4
  • Nov 2, 2006
  • #4
savegoodautonfg said:
Ok, i dont want to buy them..

I want the carboard type stuff that they have on them.
Click to expand...


Just go to home depot and get some masonite or hard board and cut it to size it is stronger than the card board and wont get reuned in the rain you can get it in 1/4 inch and 1/8 inch thickness.
 

ChromdOutDubs

Member
Sep 1, 2005
268
1
18
Tavares, Florida
Nov 2, 2006
#5
  • Nov 2, 2006
  • #5
Is that cardboard on the back of the panel easy to replace? When i was stripping my car for the paint shop, i kinda left the panel outside in this Florida Humidity... They swelled up and are in bad shape now. I was thinking about buyin new panels, but none of them on 50resto.com are for manual windows.
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Nov 2, 2006
#6
  • Nov 2, 2006
  • #6
ChromdOutDubs said:
Is that cardboard on the back of the panel easy to replace? When i was stripping my car for the paint shop, i kinda left the panel outside in this Florida Humidity... They swelled up and are in bad shape now. I was thinking about buyin new panels, but none of them on 50resto.com are for manual windows.
Click to expand...

ChromdOutDubs,

I'm not really sure its my first time trying it haha.
I plan on doing it within the next 2-3 weeks, i'll let you know how it goes.

Anyone else out there know how i would go about replacing them?
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Nov 2, 2006
#7
  • Nov 2, 2006
  • #7
wicked84gt350 said:
Just go to home depot and get some masonite or hard board and cut it to size it is stronger than the card board and wont get reuned in the rain you can get it in 1/4 inch and 1/8 inch thickness.
Click to expand...

Wicked,

I'm thinking 1/4 inch is probaly too thick, would'nt you say so, probaly i should go with the 1/8 thickness?
 

Adams91LX

Active Member
Dec 9, 2003
689
12
29
Plano, TX
Nov 2, 2006
#8
  • Nov 2, 2006
  • #8
yeah... my vote would be for 1/8th thickness..
-a
 

bullitstang1313

Member
Jan 21, 2003
713
0
16
Indianapolis / Columbus, Indiana
Nov 3, 2006
#9
  • Nov 3, 2006
  • #9
If you download the instruction for the door panel kit from 50resto, you should be able to walk through some fo the same steps. The fiber-board crap is riveted to the metal frame at the top of the door panel. I'm making my own door panels because of the same issue. They are pretty easy to take apart. I agree though, I think the 1/4 is too thick.
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Nov 3, 2006
#10
  • Nov 3, 2006
  • #10
Bullit, your keep your door panels and just making new carboard stuff. How are'nt the rivets visible.

Also, could you basically just see how you take the old carboard stuff off and use taht to realize how to put them in i would think so right?

Also the holes were the door push clips are, what should i use to cut the holes in the new masonite/hard board?
 

bubba-dough

Active Member
Dec 28, 2004
1,044
2
38
Indiana
Nov 3, 2006
#11
  • Nov 3, 2006
  • #11
bullitstang1313 said:
If you download the instruction for the door panel kit from 50resto, you should be able to walk through some fo the same steps. The fiber-board crap is riveted to the metal frame at the top of the door panel. I'm making my own door panels because of the same issue. They are pretty easy to take apart. I agree though, I think the 1/4 is too thick.
Click to expand...
Good Idea, I forgot about the instructions sheet on that by 50resto. I would use the 1/8" masonite stuff (prolly about $20) or maybe even use some abs plastic (but that will cost a lot more)
 

bullitstang1313

Member
Jan 21, 2003
713
0
16
Indianapolis / Columbus, Indiana
Nov 3, 2006
#12
  • Nov 3, 2006
  • #12
The rivets are protected from the vinyl with a foam padding. I actually used new vinyl on my door panels, and put new fabric on the insert behind the handles though. I'm not quite finished with mine.
 

bubba-dough

Active Member
Dec 28, 2004
1,044
2
38
Indiana
Nov 3, 2006
#13
  • Nov 3, 2006
  • #13
bullitstang1313 said:
The rivets are protected from the vinyl with a foam padding. I actually used new vinyl on my door panels, and put new fabric on the insert behind the handles though. I'm not quite finished with mine.
Click to expand...
Are you taking pics along the way? I would like to see some of the "in process" as well as a finished panel.
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Nov 3, 2006
#14
  • Nov 3, 2006
  • #14
Also, could you basically just see how you take the old carboard stuff off and use taht to realize how to put them in i would think so right?

Also the holes were the door push clips are, what should i use to cut the holes in the new masonite/hard board?
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Nov 7, 2006
#15
  • Nov 7, 2006
  • #15
BUMP
 

ChromdOutDubs

Member
Sep 1, 2005
268
1
18
Tavares, Florida
Nov 7, 2006
#16
  • Nov 7, 2006
  • #16
Anyone know why the panels on 50resto.com wont fit manual doors? Is the door any different, it seems like the panel should fit, just have to cut a hole for the window cranker....

-AJ
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Nov 10, 2006
#17
  • Nov 10, 2006
  • #17
not really sure man sorry.
 

bullitstang1313

Member
Jan 21, 2003
713
0
16
Indianapolis / Columbus, Indiana
Nov 10, 2006
#18
  • Nov 10, 2006
  • #18
Anyone know why the panels on 50resto.com wont fit manual doors? Is the door any different, it seems like the panel should fit, just have to cut a hole for the window cranker....
Click to expand...
I think it is just because they don't have a cutout for the manual crank. By the way, if you go to thick on the board, you will have problems with the manual crank. I will try to get some pictures of mine. The first panel went pretty good, but I tried to get fancy and add a pocket at the bottom as well as bring the speaker out some and didn't realize that it would hit the dash. I need to start from the beginning and take pictures along the way. I might try doing some of that this weekend.
 

ChromdOutDubs

Member
Sep 1, 2005
268
1
18
Tavares, Florida
Nov 10, 2006
#19
  • Nov 10, 2006
  • #19
Yeah if you could post some pics of yur progress, i wanna see how yurs turned out. What is the thickness is the original material, i will prolly just use that size, i dont really see a need in going thicker...

PS: My car will be out of the paint shop this weekend, finaly!

-AJ
 
S

savegoodautonfg

New Member
May 11, 2005
1,085
0
0
Dec 11, 2006
#20
  • Dec 11, 2006
  • #20
The holes were the door push clips are, what should i use to cut the holes in the new masonite/hard board?
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

Paint and Body Door Latch Issue
  • KRUISR
  • Oct 9, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
278
Fox 5.0 Mustang Tech Oct 15, 2026
General karthief
R
Door Panels
  • RGP413
  • Aug 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
133
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 30, 2026
AeroCoupe
D
Electrical Weird door wiring issues
  • Dakar09
  • Oct 20, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
207
Fox 5.0 Mustang Tech Oct 21, 2026
Dakar09
D
D
rear upper seat trim panel for 1995 ford mustang.
  • dustinbowman95gt
  • Aug 27, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
95
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 27, 2026
dustinbowman95gt
D
Door wiring, Unknown plug
  • TripleYellow
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
166
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 23, 2026
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?