Door Panels

Is that cardboard on the back of the panel easy to replace? When i was stripping my car for the paint shop, i kinda left the panel outside in this Florida Humidity... They swelled up and are in bad shape now. I was thinking about buyin new panels, but none of them on 50resto.com are for manual windows.
 
ChromdOutDubs said:
Is that cardboard on the back of the panel easy to replace? When i was stripping my car for the paint shop, i kinda left the panel outside in this Florida Humidity... They swelled up and are in bad shape now. I was thinking about buyin new panels, but none of them on 50resto.com are for manual windows.

ChromdOutDubs,

I'm not really sure its my first time trying it haha.
I plan on doing it within the next 2-3 weeks, i'll let you know how it goes.

Anyone else out there know how i would go about replacing them?
 
wicked84gt350 said:
Just go to home depot and get some masonite or hard board and cut it to size it is stronger than the card board and wont get reuned in the rain you can get it in 1/4 inch and 1/8 inch thickness.

Wicked,

I'm thinking 1/4 inch is probaly too thick, would'nt you say so, probaly i should go with the 1/8 thickness?
 
If you download the instruction for the door panel kit from 50resto, you should be able to walk through some fo the same steps. The fiber-board crap is riveted to the metal frame at the top of the door panel. I'm making my own door panels because of the same issue. They are pretty easy to take apart. I agree though, I think the 1/4 is too thick.
 
Bullit, your keep your door panels and just making new carboard stuff. How are'nt the rivets visible.

Also, could you basically just see how you take the old carboard stuff off and use taht to realize how to put them in i would think so right?

Also the holes were the door push clips are, what should i use to cut the holes in the new masonite/hard board?
 
bullitstang1313 said:
If you download the instruction for the door panel kit from 50resto, you should be able to walk through some fo the same steps. The fiber-board crap is riveted to the metal frame at the top of the door panel. I'm making my own door panels because of the same issue. They are pretty easy to take apart. I agree though, I think the 1/4 is too thick.
Good Idea, I forgot about the instructions sheet on that by 50resto. I would use the 1/8" masonite stuff (prolly about $20) or maybe even use some abs plastic (but that will cost a lot more)
 
bullitstang1313 said:
The rivets are protected from the vinyl with a foam padding. I actually used new vinyl on my door panels, and put new fabric on the insert behind the handles though. I'm not quite finished with mine.
Are you taking pics along the way? I would like to see some of the "in process" as well as a finished panel. :nice:
 
Also, could you basically just see how you take the old carboard stuff off and use taht to realize how to put them in i would think so right?

Also the holes were the door push clips are, what should i use to cut the holes in the new masonite/hard board?
 
Anyone know why the panels on 50resto.com wont fit manual doors? Is the door any different, it seems like the panel should fit, just have to cut a hole for the window cranker....
I think it is just because they don't have a cutout for the manual crank. By the way, if you go to thick on the board, you will have problems with the manual crank. I will try to get some pictures of mine. The first panel went pretty good, but I tried to get fancy and add a pocket at the bottom as well as bring the speaker out some and didn't realize that it would hit the dash. I need to start from the beginning and take pictures along the way. I might try doing some of that this weekend.
 
Yeah if you could post some pics of yur progress, i wanna see how yurs turned out. What is the thickness is the original material, i will prolly just use that size, i dont really see a need in going thicker...

PS: My car will be out of the paint shop this weekend, finaly!

-AJ