• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Doors And HAtch not closing

  • Thread starter Thread starter shlby123
  • Start date Start date Apr 3, 2006
S

shlby123

Founding Member
Apr 19, 2002
579
0
0
Dallas
Apr 3, 2006
#1
  • Apr 3, 2006
  • #1
More money more problems! Hey guys, My LX has a problem with the passenger door and rear hatch not fully closing. They will grab enough to keep either from just flying open but they rattle like hell, because they dont full lock down like they should. Does anybody have any troubleshooting tips I can try?
 
8

86bluecobra

Advanced Member
Dec 20, 2004
4,265
12
69
B.C. Canada
Apr 3, 2006
#2
  • Apr 3, 2006
  • #2
perhaps the post that they latch 2 is loose and it moved. you can loosen the post on the door and the hatch with a torx bit and adjust it so that they both close properly.
 

The Shape

Founding Member
Jan 11, 2002
2,224
8
49
East ARKANSAS Delta
Apr 3, 2006
#3
  • Apr 3, 2006
  • #3
Thats right the strikers can be adjusted on the doors and the hatch, also the hatch has a little rubber bumper on each corner that can be adjusted to stop the rattling as well.
 
S

shlby123

Founding Member
Apr 19, 2002
579
0
0
Dallas
Apr 3, 2006
#4
  • Apr 3, 2006
  • #4
i will certainly give it a shot. thanks guys! Oh, would it help to lube and clean out all the grime on the mechanism or does it matter?
 

The Shape

Founding Member
Jan 11, 2002
2,224
8
49
East ARKANSAS Delta
Apr 3, 2006
#5
  • Apr 3, 2006
  • #5
Wouldn't hurt to clean them off and put a little fresh grease in the mechanism.
 

mustangphil

Founding Member
Jul 9, 2002
21
0
48
No longer The Beach
Apr 3, 2006
#6
  • Apr 3, 2006
  • #6
HA! I don't know why I never thought about this. I had a problem with my hatch rattling, it would hold at the lock but when going over bumps both corners would jump like crazy and when I looked at it as it was happening there was about 1/2" gap that I could see right through. I just adjusted the striker and it seems like it'll fix the problem becauce before when I lifted on the corner it would be loose and now it seems a lot tighter. I hope it's all good when I go for a drive. Damn that was so annoying. My striker is also worn out a bit so I'll probably change it soon. Thanx guys. I feel like such a dumbass
 
You must log in or register to reply here.

Similar threads

L
Door pull panels, convertible versus coupe
  • lenzgt
  • Jun 25, 2026
  • 1994 - 1995 Specific Tech
Replies
2
Views
72
1994 - 1995 Specific Tech Jun 25, 2026
lenzgt
L
Electrical Are there any aftermarket door lock actuators that actually work?
  • 89notchDude
  • Nov 24, 2024
  • Fox 5.0 Mustang Tech
Replies
11
Views
3K
Fox 5.0 Mustang Tech Dec 2, 2024
FastDriver
L
Engine Need help diagnosing 2 dead cylinders
  • lvgnmz
  • Feb 13, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
441
Fox 5.0 Mustang Tech Feb 13, 2025
Mustang5L5
Interior and Upholstery Best vinyl adhesive for door panels?
  • wobbyguy
  • Jan 27, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 31, 2025
limp
WTB/Trade Looking for a T-Top Hatch. Possible convertible trade? (Rhode Island)
  • 7upper
  • Mar 18, 2025
  • Fox Body Mustangs For Sale (1979-93)
Replies
0
Views
319
Fox Body Mustangs For Sale (1979-93) Mar 18, 2025
7upper
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?