• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Do's and Dont's of a blower

  • Thread starter Thread starter 01BlkGT
  • Start date Start date Jan 14, 2004
  • 1
  • 2
Next
1 of 2 Next Last

01BlkGT

Founding Member
Jan 22, 2002
1,015
0
36
ATX
Jan 14, 2004
#1
  • Jan 14, 2004
  • #1
I finally have saved up enough money to get the Steeda vortech kit and I figured I would ask what are the do's and dont's of having a blower? For example,

Don't:

Run the car hard with less than a 1/4 gas
etc

Do's:

Check the oil level every week
etc

Thanks
 
B

Bullitt 2496

New Member
Jul 24, 2003
87
0
0
Woodbridge, CT
Jan 14, 2004
#2
  • Jan 14, 2004
  • #2
I'll give ya a good one... DON'T Buy it from Steeda... Get it from Tim!
 

01BlkGT

Founding Member
Jan 22, 2002
1,015
0
36
ATX
Jan 14, 2004
#3
  • Jan 14, 2004
  • #3
already got that covered
 

blkgt714

New Member
May 3, 2003
142
0
0
LA/Orange County
Jan 15, 2004
#4
  • Jan 15, 2004
  • #4
That steeda kit is really impressive.. Not one lost motor.. Wow.. Sometimes I wish I would have kept my GT and supercharged it. Supercharging the Mach's 10:1 compression.. Too risky for me! And expensive.. 6k for a kit...

 

bg00gt

New Member
Jul 22, 2003
299
0
0
bowling green, ky.
Jan 15, 2004
#5
  • Jan 15, 2004
  • #5
Lets hear some comments on this one CK owners I,m heading to Tims at the end of this month for my T-trim and wold love any and all advice
 

JCKnife

Founding Member
Feb 21, 2002
602
0
0
Ohio
Jan 15, 2004
#6
  • Jan 15, 2004
  • #6
DO install it yourself
DON'T fear tapping the oil pan
DO upgrade your suspension and tires if you expect to put the extra power to the street
DON'T get into boost (>3,000 RPM) until the car is warmed up to normal operating temps
DO get a dyno check with a/f just to be safe

Otherwise, have fun!
 

tigerdog

Founding Member
Sep 26, 2002
299
0
0
Woodstock, Ga.
Jan 15, 2004
#7
  • Jan 15, 2004
  • #7
JCKnife said:
DO install it yourself
DON'T fear tapping the oil pan
DO upgrade your suspension and tires if you expect to put the extra power to the street
DON'T get into boost (>3,000 RPM) until the car is warmed up to normal operating temps
DO get a dyno check with a/f just to be safe

Otherwise, have fun!
Click to expand...

JCKnife just summed it up nicely in his post above. The suspension/tire upgrade is valuable advise. You will really feel the difference when you are able to hook up that new found power. I just had Tim install a set of Metco uppers and lowers on my car and it is a BIG difference. Also, I see Jackasses jump in their cars...fire it up....and immediately roar off down the road. DO NOT do this with a supercharger. Let the car warm up and the charger get some heat going to it before you take off and get into boost. This is really important for making your set-up last. And finally.......don't listen to anyone give you supercharger advise that doesn't even own one !!! I see this all the time on the boards. Listen to people who have been there/done that in real life........not in their make believe internet world.
 

SmithAtlanta

Founding Member
Dec 27, 2001
1,111
0
0
Roswell, GA
Jan 15, 2004
#8
  • Jan 15, 2004
  • #8
tigerdog said:
JCKnife just summed it up nicely in his post above. The suspension/tire upgrade is valuable advise. You will really feel the difference when you are able to hook up that new found power. I just had Tim install a set of Metco uppers and lowers on my car and it is a BIG difference. Also, I see Jackasses jump in their cars...fire it up....and immediately roar off down the road. DO NOT do this with a supercharger. Let the car warm up and the charger get some heat going to it before you take off and get into boost. This is really important for making your set-up last. And finally.......don't listen to anyone give you supercharger advise that doesn't even own one !!! I see this all the time on the boards. Listen to people who have been there/done that in real life........not in their make believe internet world.
Click to expand...



All good recomendations....

One other thing I also recommend is not flooring it in overdrive or when the rpm's are very low(flooring it in 3rd with the rpms at 1500). Just not a good thing in general.
 

JM01

Founding Member
Nov 23, 2001
341
0
17
Branch Office of Hell (110º)
Jan 15, 2004
#9
  • Jan 15, 2004
  • #9
SmithAtlanta said:


All good recomendations....

One other thing I also recommend is not flooring it in overdrive or when the rpm's are very low(flooring it in 3rd with the rpms at 1500). Just not a good thing in general.
Click to expand...


Can you elaborate why? I dont do it .....just want to know
 

yellow2kgt

Founding Member
Mar 18, 2002
175
0
0
Fishersville,va
Jan 15, 2004
#10
  • Jan 15, 2004
  • #10
So far all of the advice looks good.
The reason that I can see for not flooring the car at low rpms in a high gear is because it puts a huge load on the car. Possibly causing detonation. Another thing that you might want to consider is a good shift light. I never really thought I needed one until I installed the blower. Now the tach rises a lot faster.
 

01BlkGT

Founding Member
Jan 22, 2002
1,015
0
36
ATX
Jan 15, 2004
#11
  • Jan 15, 2004
  • #11
Thanks for all the advice, I was hoping to also help out newbies with blowers as well . One more thing, what would ya'll predict my numbers be:

Mongoose kit w/
Steeda PP
BBK LT's
prochamber
magnaflow catback
70mm tb
C&L upper intake
 

Firemanz

Only you can prevent Forest Fires!
Founding Member
Dec 13, 2001
4,105
0
0
San Antonio, TX
Jan 15, 2004
#12
  • Jan 15, 2004
  • #12
01BlkGT said:
Thanks for all the advice, I was hoping to also help out newbies with blowers as well . One more thing, what would ya'll predict my numbers be:

Mongoose kit w/
Steeda PP
BBK LT's
prochamber
magnaflow catback
70mm tb
C&L upper intake
Click to expand...
I say about 385-390 at a minimum......
 

Fast Eddie 2k1

Founding Member
Apr 10, 2002
276
0
0
Seminole, Fl
Jan 15, 2004
#13
  • Jan 15, 2004
  • #13
01BlkGT said:
I finally have saved up enough money to get the Steeda vortech kit and I figured I would ask what are the do's and dont's of having a blower? For example,

Don't:

Run the car hard with less than a 1/4 gas
etc

Do's:

Check the oil level every week
etc

Thanks
Click to expand...


Did you investigate the Kenny Bell S/C?
 

hognutz

New Member
Nov 12, 2002
1,940
0
0
albany, oregon
Jan 15, 2004
#14
  • Jan 15, 2004
  • #14
SmithAtlanta said:


All good recomendations....

One other thing I also recommend is not flooring it in overdrive or when the rpm's are very low(flooring it in 3rd with the rpms at 1500). Just not a good thing in general.
Click to expand...

okay this is my big worry about running a super charger. wife driving my car and pining the the trottle in 5th gear at 1800rpms.

what would solutions be to have this not be an issue?

safer tune?

lower boots levels?

for example running an intercooled 6psi?

just run lower gears?

or just throw her a beatin if she ever did it?
 

yellow2kgt

Founding Member
Mar 18, 2002
175
0
0
Fishersville,va
Jan 15, 2004
#15
  • Jan 15, 2004
  • #15
Well to be honest, as long as you have a good tune everything should be good to go. Besides it really is not good to be lugging a car around even if it is N/A. I really think if you explained the responsiblities of driving a blown car to your wife, and explain the fact that if she does not follow the rules that you will have to spend ~$4000 to fix the damages. I think she will listen. Luckily for me (Due to a bad expeirence learning to drive a stick when she was a teenager) my wife refuses to drive a stick.
 

DeadLurker

Daily Driven
Sep 7, 2001
7,702
0
0
New York
Jan 15, 2004
#16
  • Jan 15, 2004
  • #16
Bullitt 2496 said:
I'll give ya a good one... DON'T Buy it from Steeda... Get it from Tim!
Click to expand...

Totally agree


btw all I can think of right now is don't go into boost with the radio on...I make it a habit to shut the radio off if I want to floor it to listen for any possible detonation.
 

01BlkGT

Founding Member
Jan 22, 2002
1,015
0
36
ATX
Jan 15, 2004
#17
  • Jan 15, 2004
  • #17
Fast Eddie 2k1 said:
Did you investigate the Kenny Bell S/C?
Click to expand...

Ya, but decided that the vortech was the blower for me.
 

Bullit#3441

Founding Member
Aug 5, 2002
59
0
0
Los Angeles
Jan 15, 2004
#18
  • Jan 15, 2004
  • #18
Here's some very good advice:

Make sure that you have a clean (new) fuel filter when you install your blower.

Also install new spark plugs that are the right temp and gapped correctly for a blower.

These basic things could save you hours of headaches.
 

SmithAtlanta

Founding Member
Dec 27, 2001
1,111
0
0
Roswell, GA
Jan 15, 2004
#19
  • Jan 15, 2004
  • #19
Bullit#3441 said:
Here's some very good advice:

Make sure that you have a clean (new) fuel filter when you install your blower.

Also install new spark plugs that are the right temp and gapped correctly for a blower.

These basic things could save you hours of headaches.
Click to expand...

Speaking of fuel filters, how often do you replace yours? I was guessing about every 10000-15000. Should it be more often?
 

bg00gt

New Member
Jul 22, 2003
299
0
0
bowling green, ky.
Jan 15, 2004
#20
  • Jan 15, 2004
  • #20
Thanks folks any one here got the new T-trim upgrade tim has now?
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

9
New from northern MN
  • 91firecracker
  • Apr 19, 2026
  • The Welcome Wagon
Replies
5
Views
138
The Welcome Wagon Apr 19, 2026
Noobz347
Progress Thread Progress Thread- From6to8's 95 GT/Saleen Supercharged 331 install
  • from6to8
  • Mar 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
24
Views
934
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
Progress Thread Progress Thread- From6to8's 1994 Cobra Supercharger install
  • from6to8
  • Sep 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 20 21 22
Replies
420
Views
9K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
from6to8
9
WTB: Procharger or Vortech Supercharger – 1996–1998 Mustang GT 4.6 2V – Budget $3,200
  • 96mustang.gt
  • Nov 20, 2025
  • Want to Buy
Replies
1
Views
344
Want to Buy May 3, 2026
roblabsn95
R
Who the hell puts the wrong spark plugs in a 3.8L?
  • snowstang
  • Mar 25, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
12
Views
443
1996 - 2004 SN95 Mustang -General/Talk- Apr 3, 2026
LILCBRA
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?