Driver Side door lock wont open, inside or with keyless

C

Canopener4000

New Member

Jul 1, 2009

2

0

0

Jul 2, 2009

#1

• Jul 2, 2009

• #1

I have a 1996 GT convert., and about a month ago the driver side door lock wouldnt work sometimes with the keyless or with the interior switches. Now it doesnt work at all, except (the strange part) when the door is open. As long as the door ajar switch is triggered the door lock works fine. Any ideas? i took off the paneling, and the actuator is fine as far as i could tell. Any reason it would only work when the door is open?

 

squeak93

15 Year Member

Jun 2, 2005

2,267

366

164

Joplin, Missouri

Jul 2, 2009

#2

• Jul 2, 2009

• #2

A weak actuator will do this. Put a new one in and I bet your problems are solved.

 

L

lang williams

New Member

Jun 11, 2003

567

0

0

cleveland, oh

Jul 2, 2009

#3

• Jul 2, 2009

• #3

my bro when thru this with a contour...he sprayed bp blaster thru the key hole a few times the worked it with the key an it worked ok after that.

 

A

ar0wan

New Member

Jun 19, 2009

7

0

2

Jul 2, 2009

#4

• Jul 2, 2009

• #4

As long as you feel no unusual resistance with the key, it is the actuators going out.
Mine were both shot and the fob was beat to hell by the PO cause they would 'flinch' and tease.
Replaced both immediately problem sooolved.

GL
HTH

 

C

Canopener4000

New Member

Jul 1, 2009

2

0

0

Jul 6, 2009

#5

• Jul 6, 2009

• #5

Another thing i just noticed, was the door lock actually does work if the door ajar button is pushed, but it only does not work when the door is closed about halfway and more. When its more open then that, the keyless and the door switch works just fine. I might try to take the door apart and find where the wires go through the flex section between the car and the door, maybe a loose wire in there is whats wrong.

 

Crimson2v

New Member

May 8, 2009

7

0

1

Jul 6, 2009

#6

• Jul 6, 2009

• #6

It is going to be the door latch itself, if you are having a hard time unlocking it with the key. The actuator is probably weak also, I would replace the latch and the actuator at the same time.