Drivers door lock problem

S

savegoodautonfg

New Member

May 11, 2005

1,085

0

0

Nov 30, 2007

#1

• Nov 30, 2007

• #1

To lock the drivers side door i have to open the door like half way and then it will lock/unlock but when it is'nt opened far enough if won't unlock/lock. I took thewires outo f the bottom of the actuator and hooked my test light up to it and moved around the wires and the test light, light didnt go out. it stayed steady which makes me believe the wires are fine.

I have no idea. i tried a few things but didnt seem to fix it.

any ideas guys?

 

BlownFiveLiter

have car, will race....wait, it doesn't run

15 Year Member

Nov 29, 1999

3,133

18

108

Chicagoland

Nov 30, 2007

#2

• Nov 30, 2007

• #2

Sounds like a bad actuator.

 

S

savegoodautonfg

New Member

May 11, 2005

1,085

0

0

Nov 30, 2007

#3

• Nov 30, 2007

• #3

I thought when the actuator goes bad it goes bad. Would the actuator if it was bad work when the door is half way open but not when it is closed or semi-open??

 

D

Daggar

New Member

Jul 19, 2004

3,902

5

0

Nov 30, 2007

#4

• Nov 30, 2007

• #4

It does sound like a wiring or contact problem. Did you shoot ALL the wires or jsut the pwer wire?

Check the grounds and the parallel wire that goes between the two door locks as well.

 

4G-KDMP

10 Year Member

Jul 23, 2005

935

19

39

CA

Nov 30, 2007

#5

• Nov 30, 2007

• #5

dude.. you ever thought about selling that car?

i've never seen so many different threads by a single person with one car having as many problems as you've had, i can only guess what's going to go wrong next

 

S

savegoodautonfg

New Member

May 11, 2005

1,085

0

0

Dec 1, 2007

#6

• Dec 1, 2007

• #6

I shot the two wires, for unlock and lock, when you hit the switch for the door locks on the drivers side. the passenger side ones works all the time when i hit the door lock switch.

 

squeak93

15 Year Member

Jun 2, 2005

2,286

372

164

Joplin, Missouri

Dec 1, 2007

#7

• Dec 1, 2007

• #7

I had an actuator do this. I had good wires and everything as well. Ended up the actuator was hanging up. Replaced it and problem solved. Although I wouldn't use stock replacments. Jricher or someone has a link to build your own. I did this same thing with some I bought from Best buy for like 2 bucks a piece (emp discount) and made a great quality set with no problems for the year I had the car.

 

jrichker

StangNet's favorite TOOL

In Remembrance. Thank you for your contributions

Mar 10, 2000

27,512

2,813

234

Dublin GA

Dec 1, 2007

#8

• Dec 1, 2007

• #8

Follow this link to fix your door lock actuator problems http://bellsouthpwp.net/l/r/lrichker/Mustang_tech/door_actuator_fix/1_of_8_door_actuator.htm

Stuck with door lock actuators that don't work and don't want to pay the $50+ for a new one? Tried the junkyard ones and found that they last six months and freeze up?

A new actuator for less than $5. Fix one side for $18, do both sides for only $25. I don't sell parts, I don’t make any money off of the upgrade, I just tell you how to do it cheaply and easily.

Here’s a picture of the new actuator installed: