• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Driverside Window

  • Thread starter Thread starter DarkStallion095
  • Start date Start date Nov 21, 2007
  • 1
  • 2
Next
1 of 2 Next Last
D

DarkStallion095

Member
Jun 27, 2006
93
0
7
Rancho Santa Margarita, CA
Nov 21, 2007
#1
  • Nov 21, 2007
  • #1
Hey guys. Yesterday got back from my friendly neighborhood Auto Zone after buying car wash only to realize that my driverside window would not roll up. All the swiches worked except the up button for the driverside window. Now today I went to buy some switches and that still didn't fix the problem. I then pulled switches from my bro's 97 stang, no luck then I even put his trim panel in my car and plugged in that other wire-harness module that is in the driverside panel. So I know its not that either. What else could it be? The winder is down...it makes a click noise when I push the down switch, of course I think that still works, but I don't here any such click when I push the up button. What do you guys think? Sound familiar?
 
T

tderrick

Member
Oct 27, 2004
312
0
17
Nov 21, 2007
#2
  • Nov 21, 2007
  • #2
It has to be related to the window motor somehow... time to dig into the door.
 
D

DarkStallion095

Member
Jun 27, 2006
93
0
7
Rancho Santa Margarita, CA
Nov 21, 2007
#3
  • Nov 21, 2007
  • #3
lol

Tell me about it. Any more advice guys. It didn't even go out like on the blink or nothing. Just flat-lined lol. Weird. Let me know.
 

fiveoho

15 Year Member
Apr 28, 2005
1,958
16
69
TN
Nov 21, 2007
#4
  • Nov 21, 2007
  • #4
odd. usually if its the motor is will get slower and noisier . i would have put money on the switch. mine done this a few weeks ago...the ds window would go down fine and would come up -sometimes-. went to ford and bought a $18 switch and fixed the prob
 
B

bmac50

New Member
Oct 18, 2006
123
0
0
Florida
Nov 21, 2007
#5
  • Nov 21, 2007
  • #5
Where else but down? The same thing happened to me a year or so ago and I ended up replacing the window regulator.
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Nov 21, 2007
#6
  • Nov 21, 2007
  • #6
It's funny, my 95 had the same problem. I took the switches apart and cleaned the insides, which was of no help, but once I swapped the driver and passenger side switches to the opposite sides, all was well once again. Maybe I'll pick up some new switches someday, but they work for now.
 

5.0 from 95

Founding Member
Nov 6, 2001
738
0
0
Emory, TX
Nov 21, 2007
#7
  • Nov 21, 2007
  • #7
It could be the gear that the motor drives to run the window mechanism up and down. I think you won't know very much until you get inside the door to see things.

Paul
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Nov 21, 2007
#8
  • Nov 21, 2007
  • #8
remove your door panel and pull the plug on your motor, then take a 12v drill battery or car battery and run small jumper wires off of it. Touch the wire on your motor terminals and it should move if it does reverse wires and window should go the other way. If it works both ways that rules out the motor you have a switch problem or broken wire. Also look into the glass tracks they can come off track and bind up not letting the window move. The tabs on the regulator that are glued to the glass also come off and will need to be re-glued sometimes.
 
R

RAD

New Member
Jun 16, 2006
167
0
0
Nov 21, 2007
#9
  • Nov 21, 2007
  • #9
Follow this link: http://forums.stangnet.com/showpost.php?p=6462799&postcount=10

Window bushings are probably shot.
 
D

DarkStallion095

Member
Jun 27, 2006
93
0
7
Rancho Santa Margarita, CA
Nov 21, 2007
#10
  • Nov 21, 2007
  • #10
that tech article is for the passenger side which...

I think is the same as driverside, but my problem is that I don't know what wire to jump to check the motor (don't really want to just start cutting into wires. One problem is that I can't remove the little regulator or motor (i don't know the difference or if its the same) with the window stuck down? Who ever has gone in there on the driverside should know what I am talking about. So how might I get my window back up so that I can have room to get that motor out or at least check it. Which wire to I look at?
 
D

DarkStallion095

Member
Jun 27, 2006
93
0
7
Rancho Santa Margarita, CA
Nov 21, 2007
#11
  • Nov 21, 2007
  • #11
oh yeah

And the track looks good and the window is still glued to that rail thing. Will try and hot wire regulator connector. Be right back lol.
 

The Green GT

No 13 year olds are safe around me.
10 Year Member
Jan 8, 2006
1,269
19
99
Louisiana
Nov 21, 2007
#12
  • Nov 21, 2007
  • #12
When mine does that I just pull the door panel and tap on the motor.
 
R

RAD

New Member
Jun 16, 2006
167
0
0
Nov 21, 2007
#13
  • Nov 21, 2007
  • #13
The Green GT said:
When mine does that I just pull the door panel and tap on the motor.
Click to expand...

How often it happens?
 

The Green GT

No 13 year olds are safe around me.
10 Year Member
Jan 8, 2006
1,269
19
99
Louisiana
Nov 21, 2007
#14
  • Nov 21, 2007
  • #14
RAD said:
How often it happens?
Click to expand...

Hasnt happened recently, but it used to happen every other week or so.
 
D

DarkStallion095

Member
Jun 27, 2006
93
0
7
Rancho Santa Margarita, CA
Nov 21, 2007
#15
  • Nov 21, 2007
  • #15
gave it a couple tough taps

The Green GT said:
When mine does that I just pull the door panel and tap on the motor.
Click to expand...

Tapped on the motor and that did the trick. It wasn't the switch. Goes to show, don't buy parts unless you come here and get advice first. Thank you. She's working now. Does this mean I am going to have to do this weekly? What is going out or bad if this happens?
 

The Green GT

No 13 year olds are safe around me.
10 Year Member
Jan 8, 2006
1,269
19
99
Louisiana
Nov 21, 2007
#16
  • Nov 21, 2007
  • #16
DarkStallion095 said:
Tapped on the motor and that did the trick. It wasn't the switch. Goes to show, don't buy parts unless you come here and get advice first. Thank you. She's working now. Does this mean I am going to have to do this weekly? What is going out or bad if this happens?
Click to expand...

I would have changed mine a while back, but it stopped doing it as often so it wasnt really a problem. That plus Im too lazy to do something that wont make my car any faster.

But I do plan on changing my motor... one day.
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Nov 21, 2007
#17
  • Nov 21, 2007
  • #17
there are stops inside the door to keep the glass from going to far up and down yours is going to far down and jammin the motor up try to adjust your stop up a bit that will keep that from happening. Those motors a good for the brushes going bad in them I would try to find a cheap motor
 

5.0_GT_kid

20+ Year Stangneter
Apr 18, 2004
1,155
1
39
Largo, Florida
Nov 22, 2007
#18
  • Nov 22, 2007
  • #18
Where do you guys get the window switches at? I've had a tough time finding them.
 
D

DarkStallion095

Member
Jun 27, 2006
93
0
7
Rancho Santa Margarita, CA
Nov 22, 2007
#19
  • Nov 22, 2007
  • #19
Stang Junk Yard

Well I am pretty lucky. I got two mustang junk yards relatively close to me. Nothing but stangs and fords. Telling you whenever I go, its like a kid walking through a candy store. I just want to buy everything lol. But yeah paid 40 bucks for the driverside switch panel for my vert. Better than 65 70. But yeah as I said before it wasn't the switches so I am thinking about putting them in the corral or on ebay. But will see. I get a lot of stuff on ebay, but as a seller, ebay is a big rip if you ask me. With listing fees, bid ending fees, and paypal fees. Gets pretty pricey unless you are a business and you are trying to avoid overhead. Anyways that was my $.02.
 
R

RAD

New Member
Jun 16, 2006
167
0
0
Nov 23, 2007
#20
  • Nov 23, 2007
  • #20
5.0_GT_kid said:
Where do you guys get the window switches at? I've had a tough time finding them.
Click to expand...

http://www.latemodelrestoration.com/iwwida.pvx?;item?item_no=LRS-14529C 1&comp=LRS
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

89 power window issue
  • Creomod
  • Sep 5, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
14
Views
517
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 4, 2025
WillWho?
W
P
93 Electrical Gremlins
  • Parmgeddon93
  • Jun 6, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
226
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 7, 2025
Bullitt347
Rear window failure
  • Moondog2178
  • Jul 22, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
320
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 22, 2025
Moondog2178
A
Fox/SBC
  • adimice
  • Aug 30, 2025
  • Other Auto Tech
Replies
0
Views
108
Other Auto Tech Aug 30, 2025
adimice
A
Electrical Fried my window motor…
  • AnthonyA1234
  • Oct 25, 2024
  • Fox 5.0 Mustang Tech
Replies
8
Views
431
Fox 5.0 Mustang Tech Oct 26, 2024
General karthief
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?