• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech

drone at 2500rpm?

  • Thread starter Thread starter seattlegt
  • Start date Start date Sep 4, 2006
S

seattlegt

New Member
May 3, 2006
82
0
0
Sep 4, 2006
#1
  • Sep 4, 2006
  • #1
Dear Fellow Stang members,

I have 4.10 gears and run about 2500rpm on the highway(where I do the majority of my driving right now) I know Corsa exhaust has no drone, but what about exhaust like Fowmaster, Flowtech or Pypes? I love the sound of Flowmasters, but I'm afraid of the drone at that rpm. Can anyone give me some hints as to what to expect? Corsas are a bit to expensive for me right now and I do want a little more sound at idle and I love the sound of Flowmasters as they rev.

Thanks!
 

nycstang37

New Member
Nov 18, 2005
146
0
0
Queens, NY
Sep 4, 2006
#2
  • Sep 4, 2006
  • #2
i have heard the flowmasters have little to no drone on the 05 and up models, however they dont have the sound of the previous models. its still deep but not what i would call that "flowmaster sound" its probably slightly louder ad idle and mildly louder as you go up in the rpm's(my opinion) i have heard an o/r h wakes them up but i dont know if you want to do that. i have the bassani race axle backs, and they are deep and really aggressive. but if you go easy on it they arent that bad, they drone very little if you are in the wrong gear, say 5th at 45-50 mph but doing like 60-65 you really dont have to much drone. i beleive the same is true for the ford racing ones, or the borla stinger, alittle cheaper for the fords but same quality.
hope that helps
 

bigcat

start with the upper hole, and if more traction is
May 1, 2005
3,015
1
79
7200 feet
Sep 4, 2006
#3
  • Sep 4, 2006
  • #3
flows will be OK at this RPM unless to get an O/R H pipe. you do not want to be running that RPM with the flow & O/R H combo. a few hundre RPM more or less and it is fine. 2500 is the one spot that does not sound good and also drones. i dont remember any problems before the O/R H was installed. i went on several interstate road trips before, and had ZERO complaints. after the H, i cant go exactly 80 with the stock gears. 77 or 83 is fince, but not 80.
 
A

adamb258

New Member
Mar 30, 2003
300
0
0
dallas
Sep 4, 2006
#4
  • Sep 4, 2006
  • #4
frpp here no drone above 2k either before or after the o/r x silent on the freeway
 

Stang007style

New Member
Sep 1, 2006
10
0
0
As of right now, Vicenza, Italy
Sep 4, 2006
#5
  • Sep 4, 2006
  • #5
Ok im a newb to all of this tech talk. What exactly is drone?
 

kooldawg6

mine works really well and can take a fair amount
Aug 31, 2006
1,679
2
38
Central VA
Sep 4, 2006
#6
  • Sep 4, 2006
  • #6
Drone 1. to make a dull, continued, low, monotonous sound; hum; buzz.

In the Mustang it usually happens around 2000 rpm in top gear with aftermarket exhausts. Never really bothered me much because I would drive a bit faster or slower if possible to avoid it.
 
S

seattlegt

New Member
May 3, 2006
82
0
0
Sep 5, 2006
#7
  • Sep 5, 2006
  • #7
Thanks guys! Your experiance is much appreciated
 

cowtown

Founding Member
Nov 4, 2001
228
0
16
Victoria, BC Canada
Sep 5, 2006
#8
  • Sep 5, 2006
  • #8
I just did a big road trip and was down through Seattle and running at various RPM's on the trip I didn't have any drone except when I lugged now and again in traffic though it was very brief.

Just make sure if you install the Flowmasters that you really really really tighten down the clamp that connects the system to the H-Pipe. If not you'll think they're rattling when they're not. On the Mustang Source forums there are some threads showing the best way to install the clamp as well.
 

bigcat

start with the upper hole, and if more traction is
May 1, 2005
3,015
1
79
7200 feet
Sep 5, 2006
#9
  • Sep 5, 2006
  • #9
you should torque them to about 45 ft-lbs.
 

BigWorm2005GT

New Member
Mar 30, 2005
49
0
0
Everett, WA
Sep 5, 2006
#10
  • Sep 5, 2006
  • #10
Not one of the brands you asked about, but the Magnaflows I have on don't drone, either. The L/T's woke it up a little bit and it drones a tiny bit at the right RPM, but nothing that you can't get used to (or enjoy!).
 

kooldawg6

mine works really well and can take a fair amount
Aug 31, 2006
1,679
2
38
Central VA
Sep 8, 2006
#11
  • Sep 8, 2006
  • #11
Just had the Flowmaster axle backs installed this morning. They sound very good IMO. They give the car a much deeper sound without being obnoxiously loud. They are near silent while cruising with the windows up and stereo off, however under a load they are audible. There is absolutely no droning at any rpm, BUT at lower speeds under a load I can feel the vibrations in my feet whereas the stock mufflers didn't do that.
 
You must log in or register to reply here.

Similar threads

P
2000 GT Random Power Loss
  • Pinellas50
  • Mar 9, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
303
SN95 4.6L Mustang Tech Mar 23, 2026
Pinellas50
P
K
Engine 2000 Mustang GT - Fuel issue post-blown spark plug repair
  • kenster1092
  • Feb 26, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
351
SN95 4.6L Mustang Tech Mar 10, 2026
kenster1092
K
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
393
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
1
Engine Motor swap from a 2003 Explorer
  • 1996mustang new
  • Oct 9, 2025
  • SN95 4.6L Mustang Tech
Replies
7
Views
597
SN95 4.6L Mustang Tech Oct 16, 2025
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?