• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Dropping Valve Body tomorrow.....

  • Thread starter Thread starter 93GreenLX
  • Start date Start date May 10, 2005

93GreenLX

Founding Member
Aug 22, 2002
776
0
0
Southern Maryland
May 10, 2005
#1
  • May 10, 2005
  • #1
Tomorrow, I am going to pull the valve body out and thoroughly check it out to see if it is the cuprit. I am going to replace the upper and lower gaskets, too. Anything else I need to be aware of?
 

TC93

Well-Known Member
Sep 11, 2000
2,075
1
57
Ellerslie GA 31807
May 10, 2005
#2
  • May 10, 2005
  • #2
Just be sure not to flip it over when you take off the plate to raplce the gaskets. The are about 7 check balls. But if yu have the ATSG rebuild manual, it has a diagram of where the check balls go..
 
D

Deleted member 87397

May 10, 2005
#3
  • May 10, 2005
  • #3
do you have a shift kit in it? If not, you might as well put one in while you have the VB off.
 

SilverFoxbody

New Member
Apr 7, 2005
149
0
0
May 10, 2005
#4
  • May 10, 2005
  • #4
What is your plan - what is wrong? FF86 is right - might as well take the time to do that while you have it off.

You will want both spacer plate gaskets, 12qts of MerconV, filter, new cork gasket.

Also, might as well "a" servo it.

I have a Transgo AOD VB modded if you want it....cheap $30+ship. I didn't mod it, I purchased it with a core.
 

93GreenLX

Founding Member
Aug 22, 2002
776
0
0
Southern Maryland
May 10, 2005
#5
  • May 10, 2005
  • #5
I am just pulling it to see if it is the culprit. The tranny won't shift out of second. I have adjusted the TV cable using the direction in the Ford Factory Service Manual. I bought the car off of ebay and am in the process of filing a complaint, and trying to get a partial reimbursment because the vehicle was supposed to have a tranny and motor that ran good. I will definitely keep the VB off in mind. How long was the car ran with it in? Changed the filter 2 days ago along with gaskets. I have both upper and lower VB gaskets and a ton of tranny fluid waiting
 

93GreenLX

Founding Member
Aug 22, 2002
776
0
0
Southern Maryland
May 11, 2005
#6
  • May 11, 2005
  • #6
Wait Mercon V?? Got some progrees today. I shifted into third very brielfy and then jumped back down to second. I think the VB may be a little loose(I think my in/lb torque wrench is messed up. GRRR) It was late and the fluid was hot so I will drop it down tomorrow. One of the pins was broake and making one of the 2-3 valves stick.
 
You must log in or register to reply here.

Similar threads

A
Catch can questions.
  • AngryH58
  • Sep 26, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
168
1996 - 2004 SN95 Mustang -General/Talk- Sep 29, 2026
squeak93
H
1995 cobra engine noise help
  • Holt2010
  • Nov 8, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
54
1996 - 2004 SN95 Mustang -General/Talk- Nov 8, 2026
Holt2010
H
D
For Sale 1993 Mustang LX for parts or restore
  • diesel farmer
  • Oct 6, 2026
  • Fox Body Mustangs For Sale (1979-93)
Replies
0
Views
404
Fox Body Mustangs For Sale (1979-93) Oct 6, 2026
diesel farmer
D
Fox Prepping a '91 to start after 5 years sitting?
  • 331strokerGT
  • Oct 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
14
Views
543
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 16, 2026
limp
A
Blow through intercooled questions
  • AngryH58
  • Aug 31, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
286
1996 - 2004 SN95 Mustang -General/Talk- Sep 1, 2026
AngryH58
A
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?