I'm of course talking about the conversion where you wire a GM HEI module inplace of the duraspark box with an 85 distributor. I know how to wire it and all, my question has to do with where to mount the module. I have an old PII heatsink and an aluminum bracket I fabbed up to mount it but I am wondering if I should have any concerns about moisture or if the length of wire between the module and the distributor will affect performance.
All the electrical in my engine compartment is hidden in the driver side fender and I plan to mount the module in there as well. The wiring will run through the cowel and through a grommet in the firewall to the distributor so it will probably be about 5 or 6 feet long. I imagine it will be possible for some water to get in there when it rains or when I wash the car so could this be an issue?
All the electrical in my engine compartment is hidden in the driver side fender and I plan to mount the module in there as well. The wiring will run through the cowel and through a grommet in the firewall to the distributor so it will probably be about 5 or 6 feet long. I imagine it will be possible for some water to get in there when it rains or when I wash the car so could this be an issue?