I've recently started a project, fox with a carbed 351w and a duraspark ignition set up. As of now there is no spark...it'll turn over not start. I dont know much about ignition and wiring, so if you're answering take that into consideration.
So now there is a duraspark 2 in place and also with a relay...It's over my head, so converting to the HEI seems pretty simple and more reliable
I was wondering ifff anyone would have pictures of the starter relay (what to wire where), the HEI module with wires going to coil and duraspark dist...pretty much pictures and descriptions like you are trying to describe the process to a 10year old
I'm asking for a lot I know, Or if anyone can guide me to a pretty comprehensive site on this..like i said I'm a noob at electrics and wiring
So now there is a duraspark 2 in place and also with a relay...It's over my head, so converting to the HEI seems pretty simple and more reliable
I was wondering ifff anyone would have pictures of the starter relay (what to wire where), the HEI module with wires going to coil and duraspark dist...pretty much pictures and descriptions like you are trying to describe the process to a 10year old
I'm asking for a lot I know, Or if anyone can guide me to a pretty comprehensive site on this..like i said I'm a noob at electrics and wiring