Dyno Day in South Sound (Tacoma)

[stock50LX]

ok so eastside (bellevue/woodinville/redmond/issaquah)
Me
Redrumracing
84GT350
crazyhorse
viperos


Land of morons..
Tarch


tacoma/lakewood people

Tyler65
Bobbys97R
Tomintacoma?
Lamrith
04mysticcobra (I see yer cobra on 167 alot)
Turbo92pgt



olympia people
soundgarden
88scgt

Thanks for the reckoning, Blur. Some of these folks will likely be pulled away by the Jan 8th dyno day in Monroe. But we are on in Tacoma rain or shine. I have asked a head expert to come-by for those interested in the more technical side. He ports mostly multi valve heads and intakes for Mini's, Alphas, BMW's, etc, but he used to do pushrod engines, and still does occasionally. I thought he would be a good person to ask since we'll have mod motor guys around. He showed me what to do on my P heads. With a stock cam and injectors that car has run a 12.66.

 

[TheRedBlur]

nice, I just hope theres gonna be someone there to wake up my motor, I got an all new setup with about 1100 miles on it, she really needs tuning.

 

[viperos]

well, it's good to see many more youthfullness in our little community here took you guys long enough to figure out mustangs rule, and so does stangnet (when it's not acting up that is )

 

[00-Saleen]

How many people can we have dyno?

 

[Tylerb59]

Looks like we might have a few more since the Marysville event has been cancelled. I'll be rolling down there.

 

[christian04]

Jan 15th it is... please add me to the list, thanks!

 

[stock50LX]

How many people can we have dyno?

I will be asking all those intending to do tuning to wait and go last. That way those wanting a dyno number can go through the process quickly.

 

[stock50LX]

Another reminder, if you want an A/F reading get your bung welded in before the 15th. Welding bungs takes so long it would make everyone wait. Out of consideration to fellow Stang owners, do this early. If you use your 02 bung, you'll get an accurate reading at wide open throttle only.

 

[ricksgt]

Do they have a sniffer, I know that most of us dont have bungs and arent planning on it...

rick

 

[ricksgt]

Just got off the phone with Doug, real nice guy. About the sniffer, he doesnt use one. He said if you want to get AF that to give him a call to get a bung welded in, its about $35 to get done depending on how difficult it is to reach. Also, if you are unable to get a bung welded in, then he will use an available O2 sensor that is reachable for the dyno run and plug your factory O2 back in when complete. Its highly recommended to get a bung welded in place

Rick

 

[Tylerb59]

Do we need to bring parts to get a bung welded in? Or do they provide everything.

 

[04MystiCobra]

I'm actually from Kent/Renton area. Lately I've been driving my 93 Calypso green Saleen clone. Used to prowl around Lacey when I lived there a few years back with it. I'll meet up with whoever wants to for the dyno day cruise down there. Just waitin for my tune.

 

[stock50LX]

Do we need to bring parts to get a bung welded in? Or do they provide everything.

Please read my posts. Out of consideration for all people who are trying to get on the dyno, we are asking everyone to get bungs welded ahead of time. Otherwise you will hold up the parade. Doug at Fair Lady has the bungs if you want to go early and get it done by him. Just phone him at 253 565 9823.

 

[Soundgarden0405]

No it wasnt my car that you saw at newmarket. I havent actually driven my car in the past 8 months. I was puting in a new engine and now painting so ive been driving my moms blue 96 GT since then.

 

[ricksgt]

He wont be doing any welding of bungs on the dyno day he said. However, he will do them before the dyno day and it includes all the parts. Yours would be 35 tyler, I know how your setup is. Maybe randys off road can do them up here for you

Greg - AKA - Mystic, I think that we are going to meet up at jakals for breakfast.....ok???


rick

 

[TheRedBlur]

soo, will I need a wideband bunghole for dyno tuning? and how much will it run me?

 

[Turbo92PGT]

So I can get a wideband bung welded in on the dyno day?? Wouldn't that hold up everyone and take a long time??




How much would he charge to tune my car a little bit? Or will that have to be taken care of another time when no one is there.... so we can get as many runs in as possible.

 

[TheRedBlur]

I think Dandy has a good idea there. There might be too many people dynoing to the point where some of us might not be able to get some tuning in. never been to a dyno day so I don't know what it's like. so maybe we'd be able to get some tuning in at the dyno day rate at another time?

so do I have to call the guy up to get some pricign on the tuning? I gotta know ho wmuch to save up.

 

[tarch]

could he fix my h pipe leak that's pissing the hell out of me?

lol

yeah so i guess i am coming to this one instead of the marysville one... and i like the roundup summary by the red blur... awesome dude

 

[JaKaL]

He wont be doing any welding of bungs on the dyno day he said. However, he will do them before the dyno day and it includes all the parts. Yours would be 35 tyler, I know how your setup is. Maybe randys off road can do them up here for you

Greg - AKA - Mystic, I think that we are going to meet up at jakals for breakfast.....ok???


rick

Ok, finally registered here. I'll make an appointment to get the bung done next week. Breakfast is a go for those interested-just need to know how many-send an e-mail through this site and I'll send directions.