Dyno graph

[Guz]

Tell me what you think

 

[mazen189]

DAMMIT, you have 15 more HP's than me.......

haha what do you got done? head/cam swap?

 

[slayerripkdc]

Is that a supercharged application? Maybe a vortec? The numbers seem really low.

 

[Winters98GT]

Who posts a dyno graph with no other info?

 

[tank_567]

Who posts a dyno graph with no other info?

+1 if your really making 10lbs thats weak, is this a non-pi? Im making more than 60+rwhp with about the same boost.

 

[Dark04GT]

"04 Ford" by your profile. I'm guessing heads/cams.

 

[sneaky98gt]

If I remember, this car is bone stock with a vortech, in which case the numbers are close, or maybe just a tad low.

 

[Deleted member 38176]

It states "max boost" in the graph so it's definitely a FI application. I really hope this an NPI car because those numbers are horrible for 10psi.

10psi even on a bone stock PI 2V should yield more than 345rwhp.

 

[slayerripkdc]

My friends car running a 10lb vortec put down around 370 to the wheels.

 

[Guz]

Sorry, is an 04 mustang gt automatic with a vortech V3. At the time of the dyno the tranny was slipping very bad, three days later tranny broke. I think a slipping automatic tranny has to do with the low numbers. With more timing we got about 360ish. Now that the tranny was rebuilt I want to try again.

 

[S&B]

boost curve screams centri. blower, when you see a roots blower it comes on at 3K and by 3,500K its maxed out.

that v3 is one nice unit though, keep your foot in that gas