Update, dyno results are now in..For anyone who may be interested, I have the long awaited independent test results, for the Steeda CAI, from Brenspeed..In addition, you'll also notice that Brent performed, a side by side comparison, with the C&L street CAI, and according to the results, both systems were nearly identical in both HP. and Torque numbers..Anyhow, I hope everyone may find the test results, helpful and perhaps useful, in someway... Here are your test results.
C&L Street Intake
300.07 HP/310.28 Torque
Steeda 90mm
297.60 HP/309.7 Torque
The test was performed by making 3 pulls with each air intake. The numbers above are the average of the 3 pulls.
The steeda worked great but fell short above 5,000 rpm’s, most likely due to the lack of aftermarket inlet pipe.
Karen White
Brenspeed
Visit us at www.brenspeed.com
C&L Street Intake
300.07 HP/310.28 Torque
Steeda 90mm
297.60 HP/309.7 Torque
The test was performed by making 3 pulls with each air intake. The numbers above are the average of the 3 pulls.
The steeda worked great but fell short above 5,000 rpm’s, most likely due to the lack of aftermarket inlet pipe.
Karen White
Brenspeed
Visit us at www.brenspeed.com