I recently had a problem with my stang, as it overheated & I found out that my fan was not working or turning on. I changed a bad MAXI fuse and ordered a new fan assembly. Come to find out, I still have no power at my connector to the fan.
What could be the problem? I waited for my engine to get a bit warm, but there is no signal getting through the connector (I tested it with a light tester). Even with the new assembly, and a new Maxi fuse, I can't get power. I have checked and there are no visual breaks in the wiring (runs inside the fender and firewall).
Anyone have any suggestions?
What could be the problem? I waited for my engine to get a bit warm, but there is no signal getting through the connector (I tested it with a light tester). Even with the new assembly, and a new Maxi fuse, I can't get power. I have checked and there are no visual breaks in the wiring (runs inside the fender and firewall).
Anyone have any suggestions?