the edelbrock is a very nice intake, but since its made to fit under a stock hood its not designed the best, very sharp curves in the ports ect. so i had some welding done to it, and im working on the porting now, along with the coolant mod (pretty much the same thing that 4v guys do)
before welding and porting
after
smothed out, drilled and tapped for the coolant mod(driver side rear)
coolant mod and welded intake ports
before
after, i also raised the top of the port.
im still no where near done
before welding and porting
after
smothed out, drilled and tapped for the coolant mod(driver side rear)
coolant mod and welded intake ports
before
after, i also raised the top of the port.
im still no where near done