Edelbrook or cobra?

Guero · Oct 22, 2005

I was wondering what would be better to get, edelbrook intake or the cobra one? I plan on getting heads and cam in the future and maybe after that a supercharger.

final5-0 · Oct 22, 2005

I liked the Edel enough to buy one

Since you got plans for the blower, I'd go with the Edel as it does flow a bit more air.

Grady

95GTV8 · Oct 22, 2005

well, it all depends on which edelbrock your looking @, if your still fairly stock and you get the big boy edelbrock, it might hurt your low end. So it all depends on which edelbrock your looking to get, and how far down the line your looking to put the other stuff on. I got a cobra manifold for a steal, and i can really feel a difference above 3k rpm.

Guero · Oct 23, 2005

Between two years well at least for the S/C, and thats if i decide to go ahead and get it. Heads and cam within the year for sure. So which Edelbrook should i be looking at. Rember im gonna install all the bolt ons then the intake.

Guero · Oct 23, 2005

http://store.summitracing.com/partd...t=FMS-M6001A50&autoview=sku&Ntk=KeywordSearch
how bout this one

94GTLaserRC · Oct 23, 2005

I like the Cobras...especially polished up with a nicely colored plate. They "can" be ported to accommodate a blower too.

RC

18mustangs · Oct 23, 2005

I'm a Cobra fan and prefer that intake for the street\strip, but if I couldn't find a Cobra I'd definitely go Edelbrock.
Tim

Guero · Oct 23, 2005

Guero said:
http://store.summitracing.com/partd...t=FMS-M6001A50&autoview=sku&Ntk=KeywordSearch
how bout this one

so is this one good or is it to big, i like the look of this one?

Finally a 5.0 · Oct 23, 2005

Guero said:
so is this one good or is it to big, i like the look of this one?

it is basically the same as the cobra, just looks different. it uses the same lower intake. it flows within a few cfm's of the normal cobra. that is the one i have, also just had it ported by tmoss. and to answer your question, that is fine since it is no "bigger" than the normal cobra.

WhiteDevil · Oct 23, 2005

Id go with the edel performer. Proven power and easier to have it grow with your combo.

Guero · Oct 23, 2005

http://cgi.ebay.com/ebaymotors/94-9...36474QQitemZ8008669286QQrdZ1QQsspagenameZWDVW
Is this **** any good? Because it has the 70mm Throttle Body with it, so i dont need to buy it later.

95GTV8 · Oct 23, 2005

the typhoon is a knockoff the edelbrock rpm i think. It's a knock off of one of the edelbrocks. It's a fine intake manifold but if you just throw the typhoon on a stock engine it's gonna be way to big and your gonna lose some down low power. I'd go with the cobra i got mine cheap, $290 shipped, if you hunt around on the corral.net classifieds you can find some great deals, i'd go with the cobra.

Guero · Oct 23, 2005

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8009180416&ssPageName=ADME:L:LCA:MT:31
will this one hurt me down low?

FlyBy763 · Oct 23, 2005

Guero said:
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=8009180416&ssPageName=ADME:L:LCA:MT:31
will this one hurt me down low?

nope...looks good too!

Guero · Oct 23, 2005

well its mine i bought it. now its gonna sit in my closet till i get all the bolt-óns. install them all at once.

Finally a 5.0 · Oct 23, 2005

now you just have to get the adapter...unless you're going fox setup.

Guero · Oct 23, 2005

no im gonna get the adapter to

Guero · Oct 24, 2005

i cant seem to find the adapter for the intake? were can i find it?

FlyBy763 · Oct 25, 2005

summitracing.com
dallasmustang.com
brothersperformance.com
50resto.com

edelbrock part number 3835

Guero · Oct 25, 2005

thanks alot

Edelbrook or cobra?

Active Member

Mustang Master

New Member

Active Member

Active Member

Squint as you approach, lest you be blinded by my

New Member

Active Member

New Member

New Member

Active Member

New Member

Active Member

Member

Active Member

New Member

Active Member

Active Member

Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency