EEC Test connector

G

gooch06

New Member

Sep 23, 2004

117

0

0

May 22, 2005

#1

• May 22, 2005

• #1

Where is this test connector on a 1990 LX 5.0?

 

stang22

Active Member

Jan 29, 2003

1,318

7

38

Washington, D.C.

May 22, 2005

#2

• May 22, 2005

• #2

It should be located behind the drivers side strut tower I believe. The black box connector and the little gray connector.

Tim

 

RYC CUKR

Founding Member

May 19, 2002

1,437

1

38

Orlando

May 22, 2005

#3

• May 22, 2005

• #3

stang22 said:

It should be located behind the drivers side strut tower I believe. The black box connector and the little gray connector.

Tim

Click to expand...

That is the spot. There should be a cover on it that says EEC test or something like that.

 

G

gooch06

New Member

Sep 23, 2004

117

0

0

May 22, 2005

#4

• May 22, 2005

• #4

Thanks I found it. Is there supposed to be power to the terminals?

 

jrichker

StangNet's favorite TOOL

In Remembrance. Thank you for your contributions

Mar 10, 2000

27,512

2,813

234

Dublin GA

May 22, 2005

#5

• May 22, 2005

• #5

gooch06 said:

Thanks I found it. Is there supposed to be power to the terminals?

Click to expand...

No. They are all either signal connections that are connected to ground to activate them or a test ground connection (Black/white wire) for testing purposes.

Jumpering the black/white & tan/lt greeen wire together should trigger the fuel pump relay and and make the fuel pump run if all the rest of the fuel pump circuit is OK.