Hey guys, I recently got a junkyard 4.6L block and heads and installed them in my son's 2004 GT. We also installed Pacesetter LT headers. I blocked off the EGR using a plate and plugged the hole on the manifold. I am realizing now that I should have just installed the EGR tube and EGR for emissions.
My question is, has anyone installed the EGR tube inside the car? If I remove the top part of the engine (Intake manifold, throttle body, etc.) will that give me room to install it, or will I have to remove the K member and lower the motor a little.
We did install a modular K member so it won't be too bad to drop it, but I would prefer to do it from the top, if I can. Thanks.
My question is, has anyone installed the EGR tube inside the car? If I remove the top part of the engine (Intake manifold, throttle body, etc.) will that give me room to install it, or will I have to remove the K member and lower the motor a little.
We did install a modular K member so it won't be too bad to drop it, but I would prefer to do it from the top, if I can. Thanks.