• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-

Eleanor Update

  • Thread starter Thread starter electricgreen
  • Start date Start date Aug 3, 2007
Prev
  • 1
  • 2
  • 3
  • 4
Next
First Prev 3 of 4 Next Last
E

electricgreen

Founding Member
Apr 9, 2002
1,140
0
36
Western NY
Aug 9, 2007
#41
  • Aug 9, 2007
  • #41
Ok, I snapped a quick pic, I have the back taped off to paint the back of the decklid, and the front fender is placed there so it's out of the way (yes, there is a fender bolt holding it there)




As I said, until we get the motor (supposed to be here tomorrow) in, the front end isn't going back together....

edit-guess I should have rotated that pic..sorry! Gotta go back out to get more done, might try again later, but you get the idea...

The yellow is chrome yellow, brighter than original, more like grabber than medium bright. Medium bright seemed to...tame for Eleanor.
 

Attachments

  • eleanor_004.webp
    43.3 KB · Views: 129
E

electricgreen

Founding Member
Apr 9, 2002
1,140
0
36
Western NY
Aug 10, 2007
#42
  • Aug 10, 2007
  • #42
Well, it's E-day folks!! As in, ENGINE day! We are picking it up form the hub tonight. So, I'm going to start hitting the mountian dew around 4, since we're pulling an all nighter to get it in. We did get some things done yesterday, but my time was cut short by a freaking migraine. I haven't had one in years, and it choses now of all times to decide to come back. I can take pills for the pain, but my "symptom" is a big ole spot in my vision that's like a black hole-in other words, I basically go blind (some people get a smell, some get a taste-lucky me, I go blind). that pretty much did it for me, about 9 pm. I'm hoping a few friends come over tonight to help with the engine install so I can putz around with the stupid little things like trim so we can get the quarter windows in (have to paint the a pillers first). Dh really cranked the past few months while I worked on my shops, and we've both been working like mad the past two weeks, I feel like we're forget a lot, since it seems like we're too close to done that it's not possible.
 

65stanger

big blue fuzzy closet monster
Founding Member
Oct 25, 2001
3,885
1
58
In the Deepest, Darkest, corner of THE CLOSET, whe
Aug 10, 2007
#43
  • Aug 10, 2007
  • #43
EXCELLENT!!!
 
E

electricgreen

Founding Member
Apr 9, 2002
1,140
0
36
Western NY
Aug 10, 2007
#44
  • Aug 10, 2007
  • #44
Picked it up my lunch, husband just got home and opened the crate and called me at work. Guess what? IT"S BLUE!! We told the them at least 5-6 times it had to be black. The office girl said she was writing it in big, bold letters on the build ticket. *sigh*
 

65stanger

big blue fuzzy closet monster
Founding Member
Oct 25, 2001
3,885
1
58
In the Deepest, Darkest, corner of THE CLOSET, whe
Aug 10, 2007
#45
  • Aug 10, 2007
  • #45
Mebbe she had a "blonde moment", wrote the "BL", forgot the rest and well.........................

You can repaint it yourselves....important thing to remember is you now have an engine!
 

StangDreamin'

Founding Member
Aug 10, 2002
583
0
16
2nd Ocotillo bush east of the Colorado River; Sout
Aug 10, 2007
#46
  • Aug 10, 2007
  • #46
More to the point, you can paint that engine black later! The main plan is getting it - whatever color it is - in the car in time for Woodward!

With Daylight Savings time and all that; it's 4 minutes after 10PM your time as I type this...... is it in yet????





















Ohhhhhhh, that just sounded so wrong......
 
E

electricgreen

Founding Member
Apr 9, 2002
1,140
0
36
Western NY
Aug 10, 2007
#47
  • Aug 10, 2007
  • #47
Errr...yes, the MOTOR is in, have to get some parts and pieces tomorrow, so no start up tonight/early am. Got the dyno sheet, not the dyno video...Nice lookin piece, just wish it was black!! Pics tomorrow, sleep now...
 

65stanger

big blue fuzzy closet monster
Founding Member
Oct 25, 2001
3,885
1
58
In the Deepest, Darkest, corner of THE CLOSET, whe
Aug 10, 2007
#48
  • Aug 10, 2007
  • #48
 

Platonic Solid

Founding Member
May 29, 2002
1,960
5
39
CT-USA
Aug 11, 2007
#49
  • Aug 11, 2007
  • #49
ratio411 said:
I clicked your link and my Norton AV went spastic...
Just a heads up for anyone else thinking of going there.
Click to expand...
Same here (I also use Norton). It attempted to install "DriveCleaner", which is a bogus program.
 
E

electricgreen

Founding Member
Apr 9, 2002
1,140
0
36
Western NY
Aug 13, 2007
#50
  • Aug 13, 2007
  • #50
OMG, will someone please remove the curse from this car?? There's been sooo many issues...now we finally have it to the point of it cranking. It has fuel, spark, and no ingition....
 

65stanger

big blue fuzzy closet monster
Founding Member
Oct 25, 2001
3,885
1
58
In the Deepest, Darkest, corner of THE CLOSET, whe
Aug 13, 2007
#51
  • Aug 13, 2007
  • #51
Ahh...my child, If the journey was easy, then the destination would not be so sweet!
 
E

electricgreen

Founding Member
Apr 9, 2002
1,140
0
36
Western NY
Aug 13, 2007
#52
  • Aug 13, 2007
  • #52
Holy moly, this is one LOOONNNGGG road! I'm ok with not being easy, but...dang it, we were supposed to bring her to woodward this year! Not that I don't love MY car, but-we go with the yellow mustang registry. I'd like to actually bring a YELLOW mustang for a change, lol-we're brought the greeen one every year since 03 to woodward, had to take the DD to Orlando a few years ago (it was march, so either way, neither stang would have gone there)....Ok, I'm going to finish painting the bumper anyway. This is stressful! Nothing like cranking a brand new motor without it turning over to raise your blood pressure!!
 

65stanger

big blue fuzzy closet monster
Founding Member
Oct 25, 2001
3,885
1
58
In the Deepest, Darkest, corner of THE CLOSET, whe
Aug 13, 2007
#53
  • Aug 13, 2007
  • #53
I had a similar problem with my '65 many years back. Fresh rebuilt motor, all new electric under the hood, new coil, etc.....
Drove me nuts that everything I tried to get a spark to no avail. Finally I checked the one item I believed could NOT be the problem, because it WAS brand new right out of the box. The underhood wiring harness...Sure enough the wires from the ignition switch to the solenoid were NFG! Replaced the harness and she fired right up (I actually had her start prior to replacing the harness by bypassing the solenoid.............)

That was 18 years ago. And now sally is back in pieces again waiting for me to get her repaired and back on the road......AGAIN!

Final thought.........Green is just a shade of yellow with a little blue tint.
 
E

electricgreen

Founding Member
Apr 9, 2002
1,140
0
36
Western NY
Aug 13, 2007
#54
  • Aug 13, 2007
  • #54
We tested that wire It's not new though....

(still won't kick over)
 

65stanger

big blue fuzzy closet monster
Founding Member
Oct 25, 2001
3,885
1
58
In the Deepest, Darkest, corner of THE CLOSET, whe
Aug 13, 2007
#55
  • Aug 13, 2007
  • #55
Coil? Ignition box? Distributer?


(I once forgot to put the rotor back in after a tune up)
 
E

electricgreen

Founding Member
Apr 9, 2002
1,140
0
36
Western NY
Aug 13, 2007
#56
  • Aug 13, 2007
  • #56
Hehehe-fouled plugs. All good. She RUNS. Beastie. Tried street fire, errored out, no vid to post...

Oh, and since we got the motor about 2 weeks after he said we were going to, WDC is out of the question this year. There were too many issues, too many things that needed to be worked out-we're leaving weds, and we just don't have enough time to finish everything.....Sleepy.....
 

StangDreamin'

Founding Member
Aug 10, 2002
583
0
16
2nd Ocotillo bush east of the Colorado River; Sout
Aug 13, 2007
#57
  • Aug 13, 2007
  • #57
electricgreen said:
Hehehe-fouled plugs. All good. She RUNS. Beastie.
Click to expand...

Tried street fire, errored out, no vid to post...
Click to expand...
:damnit: :damnit:
 

65stanger

big blue fuzzy closet monster
Founding Member
Oct 25, 2001
3,885
1
58
In the Deepest, Darkest, corner of THE CLOSET, whe
Aug 13, 2007
#58
  • Aug 13, 2007
  • #58


 
E

electricgreen

Founding Member
Apr 9, 2002
1,140
0
36
Western NY
Aug 13, 2007
#59
  • Aug 13, 2007
  • #59
Here's a try, never used streetfire before

Click here to see Video

Well, that appears to work. Sorry about the cruddy sound quality, it's from my older Minolta dimage digi cam. And the darkness...it was kinda late...NOW the neighbors can hate us...except the guys with the 68 Camaro, they ripped by about half an hour after we fired her up-lol.

Thanks guys, if I wasn't so tired I'd prolly look like that dot...or the banana...or the two of them at once...eerrmmm....g'night!!
 

65stanger

big blue fuzzy closet monster
Founding Member
Oct 25, 2001
3,885
1
58
In the Deepest, Darkest, corner of THE CLOSET, whe
Aug 14, 2007
#60
  • Aug 14, 2007
  • #60
A spananot?
 
Prev
  • 1
  • 2
  • 3
  • 4
Next
First Prev 3 of 4 Next Last
You must log in or register to reply here.

Similar threads

Hello from Washington State!
  • Daddys Lil Filly
  • Jun 10, 2026
  • The Welcome Wagon
Replies
5
Views
166
The Welcome Wagon Jun 10, 2026
Daddys Lil Filly
Progress Thread The Mach Returns - Update/build thread
  • squeak93
  • Feb 20, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
8
Views
387
1996 - 2004 SN95 Mustang -General/Talk- Monday at 2:45 PM
squeak93
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
G
  • Poll Poll
I got a free Mustang from Grandma
  • GrannysMustang
  • Mar 4, 2026
  • The Welcome Wagon
Replies
14
Views
454
The Welcome Wagon Mar 6, 2026
Realmongo
Considering widening my rear wheels, would like to verify my thoughts on fitment
  • 2000xp8
  • Jul 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
25
Views
497
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Today at 5:49 PM
85GT4V
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?